SanDisk Cruzer USB Flash Drive User Manual

Minimum System Requirements:  
• There is no need for you to do anything during the backup  
process.  
Help–Connects you to the technical support  
section  
Operating Systems:  
• Deleted files that have been backed up online before  
their deletion will remain online. Those files are stored  
for as long as the size of the files stored online is less  
than the capacity mentioned on your Cruzer® Titanium  
Plus drive (for more details go to ‘Restoring Deleted Files’  
section).  
8 0 - 3 6 - 0 3 1 8 3  
• Windows® 2000 Service Pack 4  
• Windows® XP  
About–Displays the software version  
c . o m  
A N D I S K - 8 ( 1 7 6 t 2 6 : 6 - S - p 3 o 4 r 7 5 )  
- 0 5 0 0 - 4 1 0 s 8 : - e 5 t r 4 2 q u a r H e a d  
s . a n d i s w / k w w t t h p : /  
• Windows® Vista®  
h n e i c T c a l S u p  
• Macintosh OS® 10+ and Linux (Storage only)***  
• USB 2.0 port required for high-speed data transfer  
Restoring Your Files  
Restoring data is fast, simple and secure.  
Cruzer® Online Backup Service system requirements:  
• Intel Pentium III 600 MHz or higher.  
• 512MB of RAM and above.  
This service is simple and secure–All your data is pro-  
tected by, and is transferred over, an encrypted 256 bit AES  
channel to a secure online storage location.  
To restore your data:  
1. Go to https://sandisk.beinsync.com/ or select Restore  
from the menu on the right side of the taskbar.  
2. Enter your email address and password and click Login.  
3. The list of files and folders that have been backed up  
are displayed. Browse to and select the file you want to  
restore.  
4. Open or save the selected file. If you choose to save the  
file, browse to the folder in which you want to save the  
file and click Save.  
• At least 10MB of free space on the Cruzer® Titanium Plus  
removable drive.  
Getting Started  
Installing  
1. Insert your Cruzer® Titanium Plus flash drive into the  
computer. Make sure your computer is connected to the  
Internet.  
No additional driver installation is required. Plug the USB  
Flash Drive into the USB port on your computer to use.  
2. You are asked to enable the Cruzer® Titanium Plus  
security, by doing the following:  
Yes: Accesses the Web registration form (see Activating  
Your Backup Service).  
No: Deactivates the service (your data is not backed up  
and protected).  
Restoring Deleted Files  
Disconnecting  
When you delete a file that has been backed up, it is not  
necessarily deleted from the backup service. Deleted files  
are stored for as long as the size of the files stored online  
is less than the capacity mentioned on your Cruzer®  
Titanium Plus drive and are removed on a first in-first  
out basis. This means that the oldest deleted files are  
removed from the backup service before more recently  
deleted files.  
You don’t need to shut down your computer to disconnect  
the USB Flash Drive, but to avoid losing data you should  
never remove the device from the USB port while the LED  
is flashing. If a drive window is open, close any associated  
windows before attempting to remove your USB Flash  
Drive.  
Ask me later: Requests a reminder to register the next  
time you insert the Cruzer® Titanium Plus flash drive.  
Note:The security features of password protected data  
access and AES hardware encryption can only be enabled  
through U3 Launchpad.  
Windows  
When accessing the online backup service, files that have  
been deleted appear in the list of files marked with an X.  
Click on a file to restore it.  
Activating Your Backup Service  
Always use the “Safely eject U3 smart drive” option to  
safely eject the Cruzer® Titanium Plus flash drive before  
unplugging it from the computer. Not ejecting the flash  
drive properly may result in data loss.  
1. If you selected Yes in the pop up screen, you are directed  
to the Web registration form. Enter the following details:  
Reporting a Lost Device  
• A valid email address  
To safely eject the flash drive:  
1. Right-click the U3 Launchpad icon  
2. Select Safely eject U3 smart drive on the toolbar.  
3. The Safe to Remove U3 Smart drive message appears.  
• A password  
To report your device as lost, in order to avoid unauthor-  
ized use of the online backup service, visit https://sandisk.  
beinsync.com/ and select Report lost.  
(in the toolbar).  
• Confirmation that you read the User’s License Agreement  
and accept the terms of the license  
2. A verification email is sent to the email address with  
which you registered. Follow the link in the email to  
activate your account.  
This automatically stops the backup service from being  
operated on this device.  
Only after the Safe to remove U3 Smart drive message is  
displayed, can the Cruzer® Titanium Plus drive be safely  
removed from the PC.  
If you find your device later, you can report your device as  
found by visiting https://sandisk.beinsync.com/. Select  
Report found to reactivate the backup service.  
Your account is now activated and the files on your Cruzer®  
Titanium Plus flash drive are automatically backed up.  
Macintosh  
1. Drag the removable disk to the desktop Trash icon.  
2. Unplug your USB Flash Drive.  
(Note: LED may stay illuminated)  
Taskbar  
Contact Support & Customer Service  
Whenever the Cruzer® Titanium Plus flash drive is inserted  
into a computer which is connected to the Internet, a  
taskbar icon appears in the status bar of your computer.  
The taskbar assists you with backup related actions and  
displays the status of your backup.  
Visit http://sandisk.beinsync.com/support/ for additional  
information on the Cruzer® online backup service.  
CruzerUSB Flash Drive  
Disposal Instructions  
Quick Start Guide  
Do not dispose of this device with unsorted household  
waste. Improper disposal may be harmful to the environ-  
ment and human health. Please refer to your local waste  
authority for information on return and collection systems  
in your area.  
The following states are displayed as icons automatically  
on your taskbar while the backup process is taking place:  
Connecting  
Backup in progress–A progress bar is displayed  
Using your Cruzer® Titanium Plus with SanDisk  
Cruzer® Online Backup Service  
during the backup process  
Backup complete–Indicates that the backup  
process is complete and that all your files are  
stored in a secure location  
Powered by BeInSync  
To open the taskbar, double-click or right-click on the icon  
to bring up the menu. The menu has the following options:  
The Cruzer® Titanium Plus flash drive includes a 6-month  
FREE integrated online backup service  
Restore–Connects you to the online backup  
service site  
It’s a set-and-forget service  
• This online backup service automatically backs up all  
the files stored on your Cruzer®Titanium Plus flash drive  
every time the flash drive is inserted into a computer that  
is connected to the Internet.  
Stop–Enables you to stop the backup  

Toshiba MK4008GAH (HDD1744) User Manual
Sony WALKMAN EJ119 User Manual
Sony PDW F75 User Manual
Sony CD Walkman D 191 User Manual
Seagate MOMENTUS ST9400326AS User Manual
Seagate BARRACUDA ES SERIAL ATA ST3400820NS User Manual
Samsung Tocco F480 User Manual
Samsung JetSet SCH R550 User Manual
Samsung Computer Drive HX M640UAB User Manual
Pioneer DEH P7100R User Manual