|
SGH-Q105
PORTABLE CELLULAR
TELEPHONE
User’s Guide
Please read this manual before operating your
phone, and keep it for future reference.
Intellectual Property
All Intellectual Property, as defined below, owned by or which is
otherwise the property of Samsung or its respective suppliers
relating to the SAMSUNG Phone, including but not limited to,
accessories, parts, or software relating thereto (the “Phone
System”), is proprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions. Intellectual
Property includes, but is not limited to, inventions (patentable
or unpatentable), patents, trade secrets, copyrights, software,
computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate
the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare
derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No
title to or ownership in the Intellectual Property is transferred to
you. All applicable rights of the Intellectual Property shall
remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA),
Inc.
Headquarters
Customer Care Center
1130 E. Arapaho Road
Richardson, TX 75081
Tel: 972.761.7000
1601 E. Plano Parkway, Suite 150
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP
(4357)
Fax: 972.761.7001
Fax: 972.761.7501
Internet Address: http://www.samsungusa.com/wireless
October 31, 2001
SGH-Q105
3
©2001 Samsung Telecommunications America, Inc. All rights
reserved. No reproduction in whole or in part allowed without
prior written approval. Samsung Telecommunications America,
Inc. is a trademark of Samsung Electronics Corporation, Ltd.
Openwave® is a registered Trademark of Openwave.
RSA® is a registered Trademark RSA Security, Inc.
T9® Word Text Input is licensed by Tegic Communications and
is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat.
6,011,554 and other patents pending.
English: 2001:1:31. Version A
Printed in South Korea
User Guide GH68-02143A
DISCLAIMER OF WARRANTIES;
EXCLUSION OF LIABILITY
DISCLAIMER OF WARRANTIES; EXCLUSION OF
LIABILITY. EXCEPT AS SET FORTH IN THE EXPRESS
WARRANTY CONTAINED ON THIS WARRANTY PAGE, THE
PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS
FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP
OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH
THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING THERETO.
4
SGH-Q105
October 31, 2001
NOTHING CONTAINED IN THE INSTRUCTION MANUAL
SHALL BE CONSTRUED TO CREATE AN EXPRESS
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT. ALL IMPLIED WARRANTIES THAT
MAY ARISE BY OPERATION OF LAW, INCLUDING IF
APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME
DURATION OF TIME AS THE EXPRESS WRITTEN
WARRANTY STATED HEREIN. SOME STATES DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION MAY
NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL
NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND
RESULTING FROM THE PURCHASE, USE, OR MISUSE OF,
OR INABILITY TO USE THE PRODUCT OR ARISING FROM
THE BREACH OF THE EXPRESS WARRANTY, INCLUDING
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS, OR FOR ANY CLAIM BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS,
WHICH VARY FROM STATE TO STATE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER
THAN THE ORIGINAL PURCHASER OF THIS PRODUCT
AND STATES PURCHASER’S EXCLUSIVE REMEDY. IF ANY
PORTION OF THIS LIMITED WARRANTY IS HELD
ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW,
SUCH PARTIAL ILLEGALITY OR UNENFORCEABILITY
SHALL NOT AFFECT THE ENFORCEABILITY FOR THE
REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
October 31, 2001
SGH-Q105
5
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS
LIMITED AS THE LAW PERMITS.
6
SGH-Q105
October 31, 2001
Introduction To Your Samsung SGH-Q105
Series Phone
Congratulations on the purchase of your Samsung SGH-Q105
Series Dual Band Phone. Using the latest digital technology, the
Samsung SGH-Q105 Series Phone operates similar to other GSM
phones, while providing superior resonance and tone quality.
Your Samsung SGH-Q105 GSM phone is packed with productive
features that are easy to use. Here are some of them:
• Operates in GSM900 and GSM1900.
• Internet Access via WAP 1.1 /UP 4.1
• One Touch Internet Access
• Internet MiniBrowser
• Electronic Administrator (PIM)
• 18 Ring Types and 2 Customizable Melodies
• Answer or hang up calls just by opening and closing the
flip on the phone.
• User friendly display with dedicated icons for signal
strength, service, messages, vibrator, and battery
• Distinctive ringer types for voice, message, and alarm
calls
• 99 Phone Book entries plus up to 300 SIM Card
entries.(SIM Card Dependent).
• Call Logs – 10 Locations each for outgoing, incoming,
and missed calls. These 30 numbers are all easy to redial.
• Two-way Short Message Services (SMS) and Voicemail
notification
• T9 text entry
• Pause Dialing for tele-services
• Alarm clock with three programmable alarms
• Last number redial – last 10 Numbers
• Tri-Lingual - English, Spanish, and French.
• Easily mute the microphone during conversation
October 31, 2001
SGH-Q105
7
How To Use This Manual
This user guide explains your Samsung SGH-Q105 phone
operations through easy-to-follow instructions and illustrations.
We’ve included some important safety and usage information
that you should know before using your phone. If you still have
questions, we’ll be happy to answer them. Just call our Samsung
Customer Care Center toll-free at 1.888.987.HELP (4357).
We hope you enjoy using your new Samsung SGH-Q105 Series
Phone, and thanks for choosing Samsung.
CC RF Exposure Information
In August 1996 the Federal Communications Commission
(FCC) of the United States with its action in Report and Order
FCC 96-326 adopted an updated safety standard for human
exposure to radio frequency electromagnetic energy emitted by
FCC regulated transmitters. Those guidelines are consistent with
the safety standard previously set by both U.S. and international
standards bodies. The design of this phone complies with the
FCC guidelines and these international standards. Use only the
supplied or an approved antenna. Unauthorized antennas,
modifications, or attachments could impair call quality, damage
the phone, or result in violation of FCC regulations. Do not use
the phone with a damaged antenna. If a damaged antenna
comes into contact with the skin, a minor burn may result. Please
contact your local dealer for replacement antenna.
Body-Worn Operation
This device was tested for typical body-worn operations using the
optional belt-clip/holster placed 0.78 inches (2.0cm) from the
body. To comply with FCC RF exposure requirements, a
minimum separation distance of 0.78 inches (2.0cm) must be
maintained between the user’s body and the phone, including
the antenna, whether extended or retracted. The use of third-
party belt-clips/holsters with no metallic components that
provide the minimum separation distance of 0.78 inches
(2.0cm) can be used to satisfy FCC RF exposure requirements.
8
SGH-Q105
October 31, 2001
The use of non-tested accessories or other body-worn operations
may not comply with FCC RF exposure requirements and should
be avoided. Contact your local dealer for optional accessory
items.
Vehicle Mounted External Antenna (Optional, if available)
A minimum separation distance of 7.9 inches (20cm) must be
maintained Between a person and the vehicle mounted external
antenna to satisfy FCC RF exposure requirements. For more
information about RF exposure, please visit the FCC website at
www.fcc.gov
SAR Information & FCC ID Labeling
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your
wireless phone is a radio transmitter and receiver. It is designed
and manufactured not to exceed the emission limits for
exposure to radiofrequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These
limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of all
persons, regardless of age and health. The exposure standard for
wireless mobile phones employs a unit of measurement know as
the Specific Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6W/kg.* Tests for SAR are conducted using standard
operating positions specified by the FCC with the phone
transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is because
the phone is designed to operate at multiple power levels so as to
October 31, 2001
SGH-Q105
9
use only the power required to reach the network. In general,
the closer you are to a wireless base station antenna, the lower
the power output. Before a phone model is available for sale to
the public, it must be tested and certified to the FCC that it does
not exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the body) as
required by the FCC for each model. The highest SAR value for
this model phone when tested for use at the ear is 1.53W/kg and
when worn on the body, as described in this user guide, is
1.35W/kg . (Body-worn measurements differ among phone
models, depending upon available accessories and FCC
requirements). While there may be differences between the SAR
levels of various phones and at various positions, they all meet
the government requirement for safe exposure.The FCC has
granted an Equipment Authorization for this model phone with
all reported SAR levels evaluated as in compliance with the FCC
RF emission guidelines. SAR information on this model phone is
on file with the FCC and can be found under the Display Grant
section of http://www.fcc.gov/oet/fccid after searching on FCC
ID A3LSGHQ105.
Additional information on Specific Absorption Rates (SAR) can
be found on the Cellular Telecommunications Industry
Association (CTIA) web-site at http://www.wow-com (see note).
* In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and
to account for any variations in measurements.
Note: The URL http://phonefacts.net may be used in place of
http://www.wow-com for direct access to SAR information.
10
SGH-Q105
October 31, 2001
Your Consumer Package ...........................................15
Accessories ................................................................................16
SoftKeys .....................................................................................18
Navigation Button .......................................................................18
Send/End Keys ...........................................................................18
Keypad .......................................................................................19
Antenna ......................................................................................20
Display Screen ...........................................................................21
Volume Buttons ..........................................................................22
Backlight .....................................................................................23
Service Light Indicator ................................................................23
Flip Cover ...................................................................................23
SIM Card ......................................................................31
Installing the SIM Card ...............................................................31
Installing/Removing the Battery ...............................32
Charging the Battery ..................................................................32
Low Battery Indicator ..................................................................33
Turning the Phone On/Off ..........................................................33
Access Codes ............................................................................33
Selecting Functions and Options .............................35
Unlock ........................................................................................37
Call Functions ............................................................39
Making a Call ..............................................................................39
International Calls .......................................................................39
Correcting a Number ..................................................................39
Ending a Call ..............................................................................40
Making a Call using the Phone Book .........................................40
Last Number Redial ....................................................................40
October 31, 2001
SGH-Q105
11
InUse Menu .................................................................44
Entering Information ..................................................49
Phone Book ................................................................52
Phone Book Options ..................................................................53
Searching and Dialing a Number ...............................................55
Menu Functions .........................................................57
Call Records ...............................................................................57
Messages ...................................................................................61
Tones .........................................................................................68
Phone Settings ...........................................................................76
Organizer ....................................................................................82
Security ......................................................................................87
Network Services .......................................................................91
WAP Browser .............................................................................98
Usage Guidelines: Performance and Safety ...........99
Understanding Signal Strength ..................................................99
Specifications are Subject to Change ........................................99
12
SGH-Q105
October 31, 2001
Exposure To Radio Frequency Signals ......................................99
Operating a Motor Vehicle ........................................................100
Electronic Devices ....................................................................100
Aircraft ......................................................................................102
Blasting Areas ..........................................................................102
Potentially Explosive Atmospheres ..........................................102
For Vehicles Equipped with an Air bag ....................................103
Storing your phone ...................................................................103
Cautions ...................................................................................103
Information to User ...................................................................103
Your Phone as a Network Device ...........................105
FCC and Industry Canada Notice ...........................105
Cautions ...................................................................................105
FCC Compliance Information ...................................................105
Owner’s Record ........................................................................106
Safety Information ....................................................106
October 31, 2001
SGH-Q105
13
14
SGH-Q105
October 31, 2001
Your Consumer Package
SGH-Q105 User Manual
Accessories
The following optional accessories are available for
the SGH-Q105:
• Car Power Charger (17140000011)
• Travel Charger (TAD056JBEB/XAR)
• Hands-free Car Kit (HKT056NBEG/XAR)
• Standard Battery (BST0569SEB/XAR)
• Data Kit (PKT056LBEC/XAR)
• Desktop Charger Kit (DKT056JBEB/XAR)
• Holster (17221075008)
• Hands Free Headset (AEP056SBEB/XAR)
• Leather Pouch (17200000022)
Contact your local Samsung dealer for more
information or visit us on the web at:
http://www.samsungusa.com/wireless
The use of any other power accessory will
invalidate any approval or warranty applying to the
phone, and may be dangerous.
When you disconnect the power cord of any
accessory, grasp and pull the connector, not the
cord.
It is extremely important that only genuine
Samsung authorized accessories be utilized with
your Samsung phone. This is because accessories
might appear to be a perfect match, and labeled
suitable for your Samsung phone, but they can
charge at different current rates. The current
provided through the accessory may not match the
current that is required by your Samsung phone
and the result of using an unauthorized accessory
may be a battery or phone melt down. Your
warranty of course, would be null and void.
16
SGH-Q105
October 31, 2001
Front View of the SGH-Q105
SGH-Q105 User Manual
SoftKeys
Softkeys are used as navigation controls to display
the desired menu options displayed on the screen.
By using the softkeys, you can quickly navigate to
the desired screen function. The softkeys are
positioned on the phone under the choices
displayed on the screen. To see the softkeys
location on the phone, look at the illustration on
page 17.
Navigation Button
The navigation button is located in the middle of
the phone between the two softkeys. It can be
pressed up, down, left, or right. The navigation
button can be used to automatically display menu
functions of your phone. For more information on
setting the shortcuts, see “Shortcut” on page 86.
The default settings for the shortcut are:
• Up - Calendar
• Down - Phone Book
• Left - Tones
• Right - Messages
Menu Browse Keys
Menu browse keys are used to cycle through the
available menu options displayed in each function.
Once the desired menu choice is found, you press
a softkey as mentioned above to select the choice.
To see the Menu Browse keys location on the
phone, look at the illustration on page 17.
Send/End Keys
The Send and End keys are used to place and end
calls on the phone. To place a call, you enter the
desired number on the keypad and press the Send
18
SGH-Q105
October 31, 2001
Keypad
key. When the call is finished, the End key is
pressed to hang up or end the call. The End key
can also be used to clear whatever screen is
displayed and return the phone to the main
screen.
Note: The Send key can also be used to answer an
incoming call while on an existing call. It flashes to
the other line to answer the call. To place the
incoming caller on hold and return to the other
call, press the Swap softkey.
The End key is also used to turn the phone’s power
On or Off. For more information on powering the
phone On or Off, see “Turning the Phone On/
Off” on page 33.
Keypad
The phone’s keypad is used to enter information
into the phone. The keypad consists of a standard
numeric keypad with the numbers 0-9, asterisk (*),
and pound (#). The keypad can also enter alpha
characters by using one of the different modes
associated with entering data. The different modes
are:
• ABC - Uses the standard letters and
numbers associated with the keypad. The
choices are cycled each time the key is
pressed.
• Number - Uses only the numeric side of the
keypad. No letters are available in this
mode.
• English - The numbers and letters are
entered in English.
• Español - In this mode, some characters
appear in Spanish format.
October 31, 2001
SGH-Q105
19
Front View of the SGH-Q105
SGH-Q105 User Manual
• Français - In this mode, some characters
appear in French format.
• Symbolic - Allows you to enter a standard
set of commonly used symbols by pressing
the keypad. The choices are cycled each
time a key is pressed.
Antenna
A device for transmitting or receiving signals. The
shape and size of the antenna is determined, in
part, by the operating frequency of the handset.
Screen Backlight
The backlight illuminates the screen allowing for
better viewing of the information being displayed.
When a key is pressed, the backlight is turned on.
It remains on for a predetermined amount of time
before automatically turning itself Off. This saves
the battery from being discharged too quickly. The
backlight can be configured to remain on if
desired. If the phone is being used with a hands
free car kit, the light remains On by default.
20
SGH-Q105
October 31, 2001
Display Screen
Display Screen
The display screen contains three different areas.
They are:
• Top
• Middle
• Bottom
Top
Displays several different function icons about the
phone status. These functions include:
• Signal Strength Indicator - The signal
strength is measured in bars that extend
upward. The more bars displayed, the
stronger the signal. Six bars indicates
maximum signal strength.
• Service Indicator - The service indicator is
displayed when a call is in progress or
airtime is being used. If the indicator is
displayed, you are being charged for
airtime.
• New Message Indicator - The new message
indicator is displayed when a new text
message is received.
• New Voice Mail Indicator - The new voice
mail indicator is displayed when a new
voice mail message has been delivered to
your Inbox.
• Vibrate On - The vibrate icon is displayed if
the phone is set to any vibrate mode. When
vibrate only mode is On, no ringer is
heard. The phone vibrates to indicate an
incoming call.
• Alarm On - The alarm icon is displayed
when you set an alarm.
October 31, 2001
SGH-Q105
21
Front View of the SGH-Q105
SGH-Q105 User Manual
• Battery Strength Indicator - The battery
strength indicator displays the amount of
available charge left in the battery. The
charge is measured with a series of black
bars. The more bars that are displayed, the
better the charge. Three bars indicates a
maximum charge.
Middle
The middle of the display screen is used to display
messages, instructions, and any other information
that you enter. Mainly text and graphics are
displayed in the middle of the screen. For
example, when you dial a phone number, the
digits are displayed in the middle of the screen.
Bottom
Soft keys are displayed with various menu
functions.
Volume Buttons
During a call, the volume buttons are used to
adjust the receiver volume. It can also be used to
set the alert setting when the phone is in idle
mode. The available alert settings are:
• Vib.+ High
• Vib.+ Medium
• Vib.+Low
• High
• Medium
• Low
• Vib.
• Off (Light only)
22
SGH-Q105
October 31, 2001
Backlight
Backlight
The display is illuminated using a backlight
whenever the unit is turned on or the flip is
opened. The light stays on for a moment and then
turns itself off. The amount of time the light is on
can be setup using the phone settings. For more
information, see “Light” on page 78.
Service Light Indicator
The Service Light Indicator flashes when the
phone is in service. It is located on the top left side
of the phone.
Note: There is an option that allows you to turn
Off the Service Indicator Light. For more
information, see “Service Light” on page 78.
Flip Cover
The flip can be used to answer or end a call when
it is opened or closed.
October 31, 2001
SGH-Q105
23
Menu Tree
SGH-Q105 User Manual
Menu Tree
1. Call Records
1: Missed Calls
2: Incoming Calls
3: Outgoing Calls
4: Delete All
1: Missed Calls
2: Incoming Calls
3: Outgoing Calls
5: Call Time
1: Last Call
2: Total Outgoing
3: Total Incoming
4: Reset Timers
6: Call Cost (SIM Dependent)
2. Messages
1: Read Messages
2: Write Messages
3: Preset Message List
1: Call me when you get this message
2: When can we meet?
3: Where are you?
4: Where is the meeting?
5: Talk to you soon
4: Setup
1: VoiceStream
1: Service Center
2: Default Type
3: Default Validity
4: Setting Name
2: Setting 2 (SIM Dependent)
3: Setting 3 (SIM Dependent)
4: Setting 4 (SIM Dependent)
5: Common Setting
1: Reply Path
1: Off
2: On
2: Delivery Reports (Off)
3: Bearer Selection
1: GSM
2: GPRS
5: Broadcast
24
SGH-Q105
October 31, 2001
Flip Cover
6: Voice Mail
1: Connect to Voice Mail
2: Voice Server Number
3. Tones
1: Ring Tone
1 - 18: Tones
2: Melody Composer
1: Melody 1
2: Melody 2
3: Ring Volume
4: Alert Type
1: Light Only
2: Melody
3: Vibration
4: Vibra+Melody
5: Keypad Tone
1: Off
2: Tone
3: Beep
6: Key Volume
7: Message Tone
1: SMS Tone
1: Mode
1: Light Only
2: Vibration
3: Single
4: Periodic
2: Tones
1 - 10: Tones
2: CB Tone
1: Off
2 - 4: CB Tone 1-3
8: Error Tone
1: Off
2: On
9: Minute Minder
1: Off
2: On
0: Connect Tone
1: Off
2: On
October 31, 2001
SGH-Q105
25
Menu Tree
SGH-Q105 User Manual
4. Phone Settings
1: Background Image
1: Off
2: Analog Clock
3: My Message
4: My Image 1
5: My Image 2
6: My Image 3
2: Greeting Message
3: Own Number
4: Language (English)
5: Light
1: Backlight
1: Off
2: Short
3: Long
2: Service Light
1: Off
2: On
6: Auto Redial
1: Off
2: On
7: Active Flip
1: Disable
2: Enable
8: Anykey Answer
1: Off
2: On
9: LCD Contrast
0: Car Kit Answer
1: Off
2: 3 Seconds
3: 5 Seconds
4: 10 Seconds
*: Reset Settings
5. Organizer
1: Calendar
2: To Do List
3: Time & Date
1: Set Time
2: Set Date
3: World Time
26
SGH-Q105
October 31, 2001
Flip Cover
4: Format
1: Time format
1: 24 Hours
2: 12 Hours
2: Date format
1: YYYY/MM/DD
2: DD/MM/YYYY
3: MM/DD/YYYY
4: Alarm
1: Once Alarm
2: Daily Alarm
3: Weekly Alarm
4: Remove All Alarms
5: Autopower
1: Disable
2: Enable
5: ShortCut
1: Keyup
1: None
2: Silent mode
3: Calendar
4: Messages
5: Tones
6: To Do List
7: Voice Mail
8: Phonebook
2: Key Down
1: None
2: Silent Mode
3: Calendar
4: Messages
5: Tones
6: To Do List
7: Voice Mail
8: Phonebook
3: Key Right
1: None
2: Silent Mode
3: Calendar
4: Messages
5: Tones
6: To Do List
7: Voice Mail
8: Phonebook
October 31, 2001
SGH-Q105
27
Menu Tree
SGH-Q105 User Manual
4: Key Left
1: None
2: Silent mode
3: Calendar
4: Messages
5: Tones
6: To Do List
7: Voice Mail
8: Phonebook
5: C Long Press
1: None
2: Silent Mode
3: Calendar
4: Messages
5: Tones
6: To Do List
7: Voice Mail
8: Phonebook
6. Security
1: PIN Check
1: Disable
2: Enable
2: Change PIN
3: Phone Lock
1: Disable
2: Enable
4: Change Password
5: SIM Lock
1: Disable
2: Enable
6: FDN Mode
1: Disable
2: Enable
7: Change PIN 2
7. Network Services
1: Call Forwarding
1: Forward Always
2: Busy
3: No Reply
4: Unreachable
5: Cancel All
2: Call Waiting
28
SGH-Q105
October 31, 2001
Flip Cover
1: Voice Calls
2: Cancel All
3: Network Selection
1: Automatic
2: Manual
4: Caller ID
1: Default
2: Hide Number
3: Send Number
8. WAP Browser
1: Home
2: http://
3: Clear Cache
October 31, 2001
SGH-Q105
29
Menu Tree
SGH-Q105 User Manual
30
SGH-Q105
October 31, 2001
2
SIM Card
A SIM card or Subscriber Identity Module, is used
as the key to the GSM network. It stores all the vital
information about you and your phone. In fact, it
is your SIM card (and not your handset) that
determines your phone number.
The SIM card also allows you to store information,
such as telephone numbers or other networks.
This is handy if you travel abroad.
Installing the SIM Card
The SIM card is installed underneath the battery
into the phone. Please take the following
precautions when installing the SIM card:
• Keep out of reach of small children, the
SIM cards can present a choking hazard.
• The SIM card contacts can be damaged by
scratches or bending due to installing
improperly.
• Make sure the phone is switched off prior
to installing the SIM card.
1. Turn the phone Off by pressing and holding
the “End” button.
2. Remove the battery from the phone.
3. Slide the SIM card lock and hold in the
unlocked position.
4. Insert the SIM card insuring that the cutoff
corner is located in the top right and the gold
contacts are facing into the phone.
5. Hold the SIM card into position and release
the SIM card lock slowly to lock into place.
6. Replace the battery.
October 31, 2001
SGH-Q105
31
Installing/Removing the Battery
SGH-Q105 User Manual
7. Turn the phone On by pressing and holding
the “End” button.
Installing/Removing the
Battery
To install the battery:
1. Insert the battery into the guide slots on the
backside of the phone.
2. Slide the battery up until you hear it lock into
place
To remove the battery:
1. Turn the phone off (by pressing and holding
“End” until the closing animation sequence
begins.)
2. Push the button on top of the battery and
slide the battery down.
Charging the Battery
The SGH-Q105 is powered by a Li-Ion battery
capable of being recharged using a Samsung
desktop or travel charger. The phone can be used
while the phone is being charged. If the phone is
turned off, a battery charge indicator is displayed
on the screen.
Note: You must fully charge the battery prior to
using the phone the very first time. A full charge
takes approximately 200 minutes.
To charge the battery
1. Connect the travel charger adapter to the
port located on the bottom of the phone.
32
SGH-Q105
October 31, 2001
Low Battery Indicator
Low Battery Indicator
When the battery becomes too weak to sufficiently
power the phone, a warning tone is heard and a
low battery indicator is displayed on the screen. A
message flashes on the screen periodically, until
the phone is placed into a charger or the power
runs out and the phone automatically shuts Off.
Turning the Phone On/Off
1. Open the flip cover and press and hold the
“End” button for 1-2 seconds.
2. If the phone prompts you for a password,
enter “00000000” and then press the “OK”
softkey.
3. If the phone prompts you for a PIN number,
enter “1234” and then press the “OK” softkey.
Note: The display language is determined by the
SIM card. To change the language, use the
language menu option.
4. To turn the phone Off, press and hold the
“End” button down for 1-2 seconds.
Access Codes
There are different access codes associated with
your phone. These codes help protect your phone
from unauthorized use. When requested for any of
the codes, key in the code and press the “OK”
softkey. If you make a mistake during the entry,
press the “Clear” button. These codes can be
accessed in the Security menu. For more
information, see “Security” on page 87.
Phone Password
The phone lock feature allows you to lock the
phone to restrict unauthorized usage. The phone
October 31, 2001
SGH-Q105
33
Installing/Removing the Battery
SGH-Q105 User Manual
is factory set to “00000000”. For more information
on locking your phone, see “Phone Lock” on
page 88 or to change the password, see “Change
Password” on page 89.
PIN
A PIN or Personal Identification Number (4-8
digits) protects the SIM card against unauthorized
use. The PIN is supplied with the SIM card. The
default PIN is “1234”. If a PIN number is entered
three times incorrectly, the code is disabled and a
PUK or Personal Unblocking Key number must be
entered. For more information on PIN numbers,
see “Change PIN” on page 88.
PUK
A PUK number (8 digits) is required to change a
disabled PIN number. The PUK may be supplied
with the SIM card. If not, or it has been lost,
contact your service provider to receive a new
number. If the PUK number is entered 10 times
incorrectly, the SIM card is disabled and a new
card is needed from your service provider.
34
SGH-Q105
October 31, 2001
3
Selecting Functions and
Options
Your phone consist of several functions that can be
customized to allow easier usability. These
functions are arranged in menus and sub-menus,
accessed via softkeys on the phone above the
standard keypad. By using the softkeys, you can
navigate through the menu structure by selecting
the desired usability option. In each menu, there
are settings that modify a particular function
installed in the phone.
The roles of the softkeys change depending on the
menu being displayed. A keyword is displayed on
the bottom of the display screen above each of the
two keys that define what role they are playing at
any given time.
Press the left softkey to choose “Menu”. Press the
right softkey to choose “PhoneBook”. The center
key can be pressed up, down, left, or right to select
options.
October 31, 2001
SGH-Q105
35
Selecting Functions and Options
SGH-Q105 User Manual
To
Then
Select the function or
option highlighted.
Press the Left Softkey.
View the next func-
tion or highlight the
next option in a list.
Press the down arrow.
Press the up arrow.
Press the right softkey.
Press the End key.
Move back to the pre-
vious function or
option in a list.
Move back up one
level in the menu
structure.
Exit the menu without
changing any settings.
Note: For some of the functions listed above, you
may be asked for a password or PIN. Enter the
requested information and press the “OK” softkey.
36
SGH-Q105
October 31, 2001
Unlock
Unlock
The Unlock feature allows you to use the softkey
buttons when the flip is closed and the
background image has been turned Off. To use
the Unlock feature, follow the steps listed below:
1. Open the flip and press the “Menu” softkey.
2. Press “4” for “Phone Settings”.
3. Press “1” for “Background Image”.
4. Press “1” for “Off”.
5. Close the flip and wait approximately three
seconds. Unlock is displayed in the lower left
corner of the screen.
6. Press and hold the “Unlock” softkey for three
seconds.
7. The “Keypad Activate” screen is displayed.
8. The “Menu” and “Name” softkeys are
displayed.
9. Press either softkey to access the menu’s while
the flip remains closed.
Note: If there is a period of inactivity, your phone
will automatically reset back to the Unlock mode.
Note: If the background image is turned On, the
keypad lock is automatically set during the idle
mode with the background image.
October 31, 2001
SGH-Q105
37
Selecting Functions and Options
SGH-Q105 User Manual
38
SGH-Q105
October 31, 2001
4
Call Functions
Making a regular call is similar to using a standard
land-line phone. The call is dialed using the
keypad and the “Send” button is pressed to
connect the call.
Making a Call
1. Turn the phone On.
2. Enter the 10 digit number using the keypad.
3. Press the “Send” button.
International Calls
To dial an international number, you perform
almost the same procedure as listed above. The
only difference is, the international prefix is
required before the number is dialed.
1. Press and hold “0”. The international prefix is
enabled and a “+” sign is displayed on the
screen.
2. Key in the country code prefix, followed by
the area code and phone number.
3. Press the “Send” button to complete the call.
Correcting a Number
There are a number of different ways to correct a
number that has been entered incorrectly, without
having to completely start over.
October 31, 2001
SGH-Q105
39
Call Functions
SGH-Q105 User Manual
Problem
Solution
The last digit is
incorrect.
Press the “C” key
once.
Any other digit in the
number is incorrect.
Use the Left and
Right navigation keys
to move to the desired
menu location.
The whole number is
incorrect.
1. Press and hold the
“C” key until the text
is deleted.
2. Press the “End” key.
key.
Ending a Call
1. When you have finished with the call, press
the “End” button or close flip.
2. The call is completed and the phone returns
to idle mode.
Making a Call using the Phone Book
Phone numbers can be stored on the phone using
the SIM card and phone memory. The phone
book allows you to keep all your commonly used
numbers with you. For more information, see
“Phonebook” on page 45.
Last Number Redial
The SGH-Q105 has the ability to automatically dial
the last number called by simply pressing the
“Send” button. The phone stores the last 10
40
SGH-Q105
October 31, 2001
Adjusting The Call Volume
numbers dialed in a log file. To recall any of these
numbers:
1. Press the “Send” button to access the list.
2. Use the arrow buttons on the phone to scroll
up or down through the list. Stop on the
desired number.
3. Press “Send” to dial the number.
Adjusting The Call Volume
To adjust the speaker volume during a call, use the
volume buttons located on the side of the phone.
Answering a Call
When you receive a call, the phone either rings or
vibrates and the service light flashes. There is also
a phone icon that moves on the screen to indicate
the incoming call. If the caller can be identified,
the number is displayed on the screen. If not, the
phone icon just flashes.
To answer the call:
1. Open the flip cover. If necessary, press “Send”
or the “Accept” softkey.
2. End the call by closing the flip or pressing the
“End” key.
To reject the call:
• Press and hold the volume key or
• Press “End” or
• Press the “Reject” softkey
The call is then forwarded to voice mail.
Note: You can also answer a call while in the phone
book or menu features.
October 31, 2001
SGH-Q105
41
Call Functions
SGH-Q105 User Manual
Viewing Missed Calls
A missed call log saves the last 10 numbers on the
phone. The number of missed calls is displayed on
the screen.
To view the missed calls:
1. Press the “View” softkey.
2. Choose one of the following:
•
•
•
Scroll through the list of missed calls
using the navigation buttons.
Call the number displayed by pressing
the “Send” button.
Edit or delete the missed call number by
pressing the “Options” softkey.
Editing Missed Call Numbers
1. Highlight the missed call and press the
“Select” softkey.
2. Press the “Options” softkey.
3. Press “2” for “Edit Number”.
4. Change the number. Press the Up or Down
arrow button to scroll through the number.
5. Choose one of the following options:
•
Call the number by pressing the “Send”
button.
•
Store the number by pressing the “Save”
softkey. Enter the name and location to
store the number.
6. Press the “End” button to exit.
42
SGH-Q105
October 31, 2001
Viewing Missed Calls
Deleting a Missed Call
1. Press the “Options” softkey.
2. Highlight “Delete”
3. Press the “Select” softkey.
Note: You can press the “End” button at any time
to exit.
October 31, 2001
SGH-Q105
43
InUse Menu
SGH-Q105 User Manual
InUse Menu
The following options are available in the Options
menu. They are:
• Mute/Unmute
• Mute Keys/Send Keys
• Send DTMF
• Phone book
• SMS Service
Mute/Unmute
The microphone can be switched Off. This allows
you to speak with another individual without the
caller hearing you.
To mute the caller:
1. Press the “Options” softkey.
2. Press “1” for “Mute”.
To un-mute the caller:
1. Press “Options”.
2. Press “1” for “Unmute”
Mute/Send Keys
The key tones can be muted to avoid tones being
heard when the numeric keys are pressed.
To mute the tones:
1. Press the “Options” softkey.
2. Press “2” for “Mute Keys”.
To Send Keys:
1. Press the “Options” softkey.
2. Press “2” for “Send Keys”.
44
SGH-Q105
October 31, 2001
Send DTMF
Send DTMF
The Send DTMF option sends a series of numeric
key tones through the microphone. This feature is
useful when dialing automated systems. To send
DTMF tones:
1. Press the “Options” softkey.
2. press “3” for “Send DTMF”
3. Enter the number using the keypad or press
the “Name” softkey to select a name from the
phone book.
4. Press the “OK” softkey.
Phonebook
During a call, you can search through your phone
book to find a desired entry.
1. Press the “Options” softkey.
2. Press “4” for “Phonebook”.
3. Highlight the desired entry and press the
“View” softkey.
4. Press the “Options” softkey for more options.
SMS Service
You can view or compose a new SMS Message
during a call.
To view or compose:
1. Press the “Options” softkey.
2. Press “5” for “SMS Service”.
3. Press “1” for “Read Messages”, or “2” for
“Write Messages”.
Hold
A caller can be placed on hold at anytime during a
call. This feature allows you to place one caller on
hold and then place a call to a second caller. Once
October 31, 2001
SGH-Q105
45
InUse Menu
SGH-Q105 User Manual
connected, you can switch back and forth between
the two or connect everyone together.
To place a call on hold:
1. Press the “Hold” softkey.
To return to the call, press the “Unhold” softkey.
Call Waiting
You can answer an incoming call while already on
an existing call. The Call Waiting option must be
set in the phone settings for this feature to work
correctly.
Note: Make sure Call Waiting is supported by your
carrier’s network.
Setup Call Waiting
To activate the call waiting feature:
1. Open the flip and press the “Menu” softkey.
2. Press “7” for “Network Services”.
3. Press “2” for “Call Waiting”.
4. The following choices are available:
•
•
Voice Calls
Cancel All
5. Press “1” for Voice Calls.
6. Press the softkey to Activate or Deactivate Call
Waiting.
Conference Calling
You can have a conference call with up to six
people by using the Multi-party Calling option.
Multi-party Calling allows all parties in the
coversation to talk to one another.
Note: Make sure that Multi-party calling is
supported by your carriers network.
46
SGH-Q105
October 31, 2001
Conference Calling
Making a Multi-party Call
1. Call the first person the normal way by dialing
their number and pressing the “Send” key.
2. Call the second person in the normal way.
(The first caller is automatically placed on
hold).
Note: To avoid the first caller from hearing the key
tones, you can mute the key tones using the InUse
menu options.
3. To join the first and second callers together,
press the “Options” softkey and select “Join”.
4. To add additional callers, use the “Join”
option.
Note: Incoming callers can also be added by
answering the call and selecting the “Join” option.
Private Conversation on a Multi-party Call
1. Press the “Options” softkey and select the
“Select One” option.
2. A list of participants is displayed. Highlight
the desired caller and press “Select” softkey.
3. Highlight “Private” and press the “OK”
softkey.
Now you are connected privately with the selected
person. Other participants can continue the
conversation while you are in private mode.
4. To exit the private call and return to the
multi-party call, press the “Options” softkey
and select “Join”.
All multi-party callers are reconnected with each
other.
October 31, 2001
SGH-Q105
47
InUse Menu
SGH-Q105 User Manual
Dropping a Single Participant
1. Press the “Options” softkey and select the
“Select One” option.
2. A list of participants is displayed. Highlight
the desired caller and press “Select” softkey.
3. Highlight “Remove” and press the “OK”
softkey.
The call is dropped with that participant, but the
other callers are still connected.
4. End the multi-party call by closing the flip
cover or pressing “End”.
48
SGH-Q105
October 31, 2001
T9 Word® Entry
Entering Information
When you store a name in the Phone Book or
schedule events in the calendar, text is entered
into the phone using the keypad. There are several
different text entry modes available to enter this
information.
They are:
• T9
• Uppercase
• Lowercase
• Number
T9 Word® Entry
This mode allows you to enter words with fewer
key strokes. Each key has several letters or a
number associated with it when it is pressed. T9
automatically compares the keystrokes with a
linguistic database to determine the correct word.
For example, if you press 4, 3, 5, 5, 6, the word
“Hello” is displayed. If the desired word is not
displayed, you can press “0” to scroll through a list
of possible matches.
To delete a character, press the “Clear” key located
in the middle of your phone. To delete the entire
screen, press and hold the “Clear” key.
To make capital letters, you can use the “Shift” key.
There are two states of capitalization, they are:
Lowercase and Cap Lock. Press the Shift key to
cycle bewteen the two modes.
Note: To exit without saving at anytime, press the
“End” key.
October 31, 2001
SGH-Q105
49
Entering Information
SGH-Q105 User Manual
Uppercase Entry
This mode allows you to enter uppercase letters,
special characters or numbers based on the
number of times a key is pressed. Each key has
several letters and a number associated with it
when it is pressed. To cycle through the available
letters, the key is pressed until the desired letter is
displayed.
List of Characters Available
Key
1
Lower Case
Upper Case
. % @ _ £ $ ¥ ¤ §
(Space). 1 ! ? & ¡
§
2
a b c 2 à
å æ Γ
A B C 2
Å Æ Ç Γ
3
4
5
6
d e f 3 è é Φ
g h i 4 ì
j k l 5 Λ
D E F 3 É ∆ Φ
G H I 4 θ
J K L 5 Λ
m n o 6
ø ò
M N O 6
P Q R S 7 ∏ ∑ Ξ
T U V 8
Ø
ö
7
8
9
0
p q r s 7 ß ∑ Ξ
t u v 8 ù
ü
w x y z 9 Ω
W X Y Z 9 Ω
/ : - + ( ) < >
0 * # , ; ’ ” =
50
SGH-Q105
October 31, 2001
Lowercase Entry
Lowercase Entry
This mode is similar to uppercase mode, except it
enters lowercase letters, special characters, and
numbers.
Number Entry
This mode allows you to enter just numbers that
are associated with the keypad. No letters can be
entered using this mode.
Changing the Entry Mode
The text entry mode is displayed in the lower
middle of the display. To change the mode:
1. Press the right softkey.
October 31, 2001
SGH-Q105
51
Phone Book
SGH-Q105 User Manual
Phone Book
Your phone has a phone book that allows you to
store names and numbers of commonly called
people. The phone book is stored in two different
places, the SIM card and the memory located in
the phone. Even though the memory locations are
located in two separate places, the phone book
uses the memory as if it was one large block. Up to
399 different entries (99 in the phone memory,
and up to 300 on the SIM card) can be stored in
the phone book.
Storing a New Number
When you start to dial a number using the keypad,
the word “Save” is displayed in the bottom left of
the screen.
1. Enter the number using the keypad that is
going to be saved.
2. Press the “Save” softkey.
3. Enter the name of the entry using the desired
text entry mode. For more information about
entering text, see “Entering Information” on
page 49.
Note: The maximum length of the name depends
on the SIM card installed in the phone.
4. When finished entering the name, press the
“OK” softkey. The first available memory
location is displayed.
5. Press the right softkey to cycle between the
SIM card and the Phone memory.
6. Press the “OK” softkey to save the number is
the available memory location. To cancel
52
SGH-Q105
October 31, 2001
Phone Book Options
without saving the name and number, press
the “End” key.
Phone Book Options
When storing or viewing the phone book entries,
“Options” is displayed in the lower left side of the
screen.
The following options are available:
• Paste
• Edit
• Erase
• Copy
• Caller Group
Accessing Options
1. Press the “Options” softkey to display the
available options for the phone book entry.
2. Scroll up or down through the options using
the arrow key or press the corresponding
number on the keypad to select.
Paste
This option allows you to paste the phone book
number into the normal dialing mode. This is
helpful if you need to dial a number similar to the
one stored in the phone book. Use the back arrow
softkey to edit the number.
To paste a number:
1. View the desired phone book entry.
2. Press the “Options” softkey.
3. Press “1” to “Paste” the number.
4. The number is displayed on the screen. Use
the right softkey to delete one number at a
time.
October 31, 2001
SGH-Q105
53
Phone Book
SGH-Q105 User Manual
Edit
This option allows you to edit the existing phone
book entry.
To edit the entry:
1. View the desired phone book entry.
2. Press the “Options” softkey.
3. Press “2” to “Edit”.
4. The name of the entry is displayed. Edit the
name or press the “OK” softkey to continue.
5. The number of the entry is displayed. Edit the
number or press the “Save” softkey to
continue.
6. The entry is automatically saved.
Erase
This option allows you to erase the phone book
entry. A confirmation message is displayed to make
sure that you want to permanently delete the
message.
To delete an entry:
1. View the desired phone book entry.
2. Press the “Options” softkey.
3. Press “3” to “Erase”.
4. Press the “Yes” softkey to delete the entry or
“Cancel” to cancel the deletion.
Copy
This option allows you to copy a phone number to
a different location. Use this option to copy and
paste an existing number into a new entry and
then modify the number. Store the new number
on the SIM card or in the phones memory.
To copy and edit an entry:
1. View the desired phone book entry.
54
SGH-Q105
October 31, 2001
Searching and Dialing a Number
2. Press the “Options” softkey.
3. Press ““4” for “Copy”.
4. Select the desired memory location to copy
the number into.
5. The phone book list is displayed with a
duplicate entry.
6. Highlight the duplicate entry and press the
“View” softkey.
7. Press the “Options” softkey.
8. Press “2” to edit the entry.
Caller Group
The Caller Group allows you to assign the phone
book entry to one of 5 different groups. You can
also choose to select “No Group”.
To set call group:
1. View the desired phone book entry.
2. Press the “Options” softkey.
3. Press “5” for “Caller Group”.
4. The caller groups are displayed. Highlight the
desired group and press the “Select” softkey.
Searching and Dialing a Number
One of the most convenient features about the
phone is the ability to save common names and
phone numbers to allow easy dialing. No more
looking up numbers in a day timer or regular
phone book. Depending on the SIM card, the
phone can store up to 300 different names and
numbers. This allows you to keep all your friends
and family’s phone numbers with you at all times.
Searching and Dialing
1. Press the “Name” softkey.
2. The following two choices are displayed:
October 31, 2001
SGH-Q105
55
Phone Book
SGH-Q105 User Manual
•
•
Search - This allows you to search the
entries currently saved in the SIM Card
and phone memory.
Options - The following options are
displayed:
– Caller Group - Search listing by caller
group.
– Memory Status - Displays the available
card memory available.
– SDN - SIM Card Dependent.
3. Open the flip and enter the first few letters of
the name you are looking for using the
keypad.
4. Press the “Search” softkey.
Note: To display the entire contents of the phone
book, just press the “Search” softkey without
entering any search criteria.
5. Highlight the desired entry from the list and
press the “Send” button.
56
SGH-Q105
October 31, 2001
5
Menu Functions
As outlined in the menu tree(“Menu Tree” on
page 24), your phone is equipped with the
following menus:
• Call Records
• Messages
• Tones
• Phone Settings
• Organizer
• Security
• Network Services
• WAP Browser
Call Records
Call records are used to keep a list of missed,
incoming, and outgoing calls on your phone. The
time, date, and caller ID is displayed if available.
Missed Calls
The last 10 missed calls are saved when you are
away from your phone or just unable to answer an
incoming call. A missed call is logged even if the
caller leaves a voice mail message. When a missed
call is received, a message is displayed to alert you
that you missed the call. If the memory is already
full, the oldest one is deleted to make room.
To view missed calls:
1. Open the flip and press the “Menu” softkey.
2. Press “1” for “Call Records”.
3. Press “1” for Missed Calls”
4. The missed call list is displayed. Use the arrow
keys to cycle through the missed calls.
October 31, 2001
SGH-Q105
57
Menu Functions
SGH-Q105 User Manual
Incoming Calls
The calls 10 calls that are received and answered
are saved in this log. The time, date, phone
number, and caller name are all saved if available.
If the memory is already full, the oldest incoming
call entry is deleted to make room.
To view the incoming call list:
1. Press the “Menu” softkey.
2. Press “1” for “Call Records”.
3. Press “2” for “Incoming Calls”.
4. Use the arrow keys to cycle through the
incoming calls.
Outgoing Calls
A record of the last 10 outgoing calls are saved in
the Outgoing call log. The time, date, phone
number and caller name is saved if available. If the
memory is already full, the oldest outgoing call is
deleted to make room.
To view outgoing calls:
1. Press the “Menu” softkey.
2. Press “1” for “Call Records”.
3. Press “3” for “Outgoing Calls”.
4. Use the arrow keys to cycle through the
incoming calls.
Note: In all Call Records (Missed, Incoming, and
Outgoing), you can press the “Send” key to return
or place a call if the caller ID information was
saved.
58
SGH-Q105
October 31, 2001
Call Records
Delete All
The delete all option allows you to delete the
Missed, Incoming, and Outgoing call logs.
To delete all:
1. Press the “Menu” softkey.
2. Press “1” for “Call Records”.
3. Press “4” for “Delete All”.
4. Press one of the following:
• “1” for Missed Calls
• “2” for Incoming Calls
• “3” for Outgoing Calls
5. Press the “Yes” softkey to confirm deletion.
Call Time
The amount of time spent on the phone is
measured and saved. The following call times can
be displayed:
• Last Call - Displays the call time of the last
call made.
• Total Outgoing - Displays the total call time
of all outgoing calls made from the phone.
• Total Incoming - Displays the total call time
of all incoming calls.
• Reset Timers - Clears the above timers
back to zero.
To access the call time:
1. Press the “Menu” softkey.
2. Press “1” for “Call Records”.
3. Press “5” for “Call Time”
4. Press one of the following:
• “1” for “Last Call”
• “2” for “Total Outgoing”.
• “3” for “Total Incoming”
October 31, 2001
SGH-Q105
59
Menu Functions
SGH-Q105 User Manual
There is also a setting that resets all the timers
back to zero.
To reset the call timers:
1. Press the “Menu” softkey.
2. Press “1” for “Call Records”.
3. Press “5” for “Call Time”
4. Press “4” for “Reset Timers”.
5. Enter your password and press the “OK”
softkey.
60
SGH-Q105
October 31, 2001
Messages
Messages
Your phone is capable of receiving voice mail
notifications and text messaging. Each of these
services is offered through your local carrier. For
service information, please contact your carrier.
When a voice mail or text message is received, a
notification is displayed on the screen and a tone is
played to alert you that there is a new message
available.
A text message is represented by an envelope icon.
The voice mail message is represented by a reel-to-
reel icon. If the message memory is full, an error
message is displayed and you cannot receive any
new messages. Delete older messages to insure that
enough space is available.
Reading Messages
When a text message is received, an alert is
displayed on the screen. If the alert is dismissed,
you can read your text messages by opening the
“Read Messages” menu. When the Read Messages
menu is opened, the header of the message is
displayed. The following information is displayed
in the open message:
• Message Number
• Message Status (New, Old, Not Sent, Sent)
To read messages:
1. Press the “Menu” softkey.
2. Press “2” for “Messages”.
3. Press “1” for “Read Messages”.
•Press “1” for “Inbox” to read new
or existing messages.
October 31, 2001
SGH-Q105
61
Menu Functions
SGH-Q105 User Manual
•Press “2” for “Outbox” to view the
messages that have already been
written or saved, but not sent.
4. The header information of the first message is
displayed. Press the “View” softkey to display
the body of the message.
5. Press the Up/Down arrow to scroll through
the message.
Message Options
The following options are available in the Read
Messages menu:
• Delete - Allows you to delete old messages
that are no longer needed to free up
memory.
• Text Reply - This option allows you to reply
by sending a new text message. You can
also change the SMS number, send the
message, save and send the message, save
but not send the message.
• Call Back - Allows to call the sender of the
message.
• Cut Number - Allows you to extract the
phone number from the message text. The
number can be saved in the phone book or
called back.
• Send - Allows you to send a message that
has not yet been sent.
• Edit Message - Allows you to edit the
message.
Write Messages
Your phone is equipped with Short Message
Service (SMS). This allows you to send and receive
62
SGH-Q105
October 31, 2001
Messages
text messages from your phone. In the Write
Messages menu you can write and edit text
messages with up to 160 characters.
To write a new message:
1. Press the “Menu” softkey.
2. Press “2” for “Messages”.
3. Press “2” for “Write Messages”.
4. Enter the body of the message using the
keypad. Select the desired mode of entry by
pressing the right softkey.
Note: Each time the right softkey is pressed, a new
mode is selected. The mode is displayed at the
bottom of the screen.
5. Press the “OK” softkey when finished.
6. Select one of the options listed by pressing the
corresponding numeric key:
1 Send Only
2 Save and Send
3 Save Only
Note: When the message log is full, the envelope
icon flashes and the only option available is “Send
Only”.
7. If “1” or “2” is selected, enter the destination
number or select it from the phone book by
pressing the “Name” softkey.
8. Press the “OK” softkey.
Preset Message List
Using this menu you can save up to five different
frequently used messages. The 5 default messages
are:
October 31, 2001
SGH-Q105
63
Menu Functions
SGH-Q105 User Manual
• Call me when you get this message
• When can we meet?
• Where are you?
• Where is the meeting?
• Talk to you soon
You can scroll through the list by using the Up/
Down arrow key. The following options are
available in the Preset Message List:
• Edit - Allows you to write a new message or
edit the selected preset message.
• Send Message - Allows you to send the
selected preset message.
• Delete - Allows you to delete the selected
preset message.
To view the Preset Message List:
1. Press the “Menu” softkey.
2. Press “2” for “Messages”.
3. Press “3” for “Preset Message List”.
Note: If there are no preset messages, you can
create new messages by pressing the “Options”
softkey.
Setup
All the default set up information for SMS is
configured using this menu. There are two
different menus in the Setup menu. They are:
•
VoiceStream
— Service Center - Allows you to save or
change the phone number of the SMS
center required for sending messages.
This number is obtained from your local
carrier.
64
SGH-Q105
October 31, 2001
Messages
— Default Type - Allows you to set the
default message type. (Text and Email).
The network converts the message into
the selected format.
— Default Validity - Allows you to set the
default time period for saving messages
in the SMS center while they are
attempting delivery. Possible values are;
one hour, 6 hours, 24 hours, one week
and Maximum.
— Setting Name - Allows you to change the
name displayed in the Setup menu.
•
Common Setting
— Reply Path - This option turns On or Off
the “Reply Path” option.
— Delivery Reports - This option turns On
or Off the “Delivery Reports” option.
— Bearer Selection - This option allows you
to choose between GSM and GPRS.
To access the Setup menu:
1. Press the “Menu” softkey.
2. Press “2” for “Messages”.
3. Press “4” for “Setup”.
4. Press “1” for “VoiceStream” or press “2” for
“Common Settings”.
October 31, 2001
SGH-Q105
65
Menu Functions
SGH-Q105 User Manual
Broadcast
This service allows you to receive text messages on
various topics, such as the weather, sports, or stock
quotes. Text messages are displayed with the
requested information when they are received.
The last five messages received are saved for later
viewing. For more information, please contact
your local carrier. The following options are
available in the Broadcast menu:
• Read - Allows you to view the new broadcast
message. Use the Up/Down arrow key to
scroll through the message.
• Receive - This option enables or disables
the broadcast option. This option must be
enabled for you to receive broadcast
messaging.
• Channel List - This list all the available
channels. Channels currently selected are
marked using an asterisk (*). When
selected, you can edit, enable, disable, or
delete the channel. The “Enter Channel”
option allows you to enter a new channel to
the list. Enter the channel ID and title for
the new channel.
• Language - Allows you to select your
desired language. The broadcast messages
are sent in the language selected.
Voice Mail
Voice mail messages are stored on the carrier’s
network. A notification message is sent by the
network to your phone to alert you of a new
message.
When you first contact the voice mail system, you
are asked some simple questions to set up the new
voice mail account. You must record your first and
66
SGH-Q105
October 31, 2001
Messages
last name and assign a password between 4 - 7
digits long. Follow the instruction prompts to
properly set up the account.
Connect to Voice mail:
1. Open the flip and press the “Menu” softkey.
2. Press “2” for “Messages”
3. Press “6” for “Voice Mail”.
4. Press “1” to connect.
5. Press “1” again or the “OK” softkey to confirm
connection.
6. Follow the voice prompts.
Note: To connect to the voice mail system quickly,
you can press and hold the “1” key.
Voice Server Number
The Voice Server number can be changed
depending on where you are located. If you make
a trip to another country, you can modify the voice
server number to connect to a local number. To
access voice server number:
1. Open the flip and press the “Menu” softkey.
2. Press “2” for “Messages”.
3. Press “6” for “Voice Mail”.
4. Press “2” for “Voice Server Number”.
October 31, 2001
SGH-Q105
67
Menu Functions
SGH-Q105 User Manual
Tones
The tones menu is used to choose desired ringer
types, compose melodies for custom ringers, and
setup volume levels for the different tones
available in the phone. The following options are
available:
• Ring Tone
• Melody Composer
• Ring Volume
• Alert Type
• Keypad Tone
• Key Volume
• Message Tone
• Error Tone
• Minute Minder
• Connect Tone
Ring Tone
This option allows you to select the type of ringer
tone that you want to play for incoming calls and
messages. Each time a tone is selected, it plays a
sample ringer.
To access the ring tone:
1. Press the “Menu” softkey.
2. Press “3” for “Tones”
3. Press “1” for “Ring Tone”.
4. Use the Up/Down arrow key to scroll through
the available tones.
5. Press the “Select” softkey to save the tone as
the new ringer.
Melody Composer
The melody composer allows you to create your
own custom ringer by composing notes. The notes
68
SGH-Q105
October 31, 2001
Tones
are composed by pressing the keypad and then
using the Up/Down arrow to change the octave or
pitch of the note. Three different octaves are
available with a maximum of 100 notes. You can
also adjust the rest and length of the note.
To compose a melody:
1. Press the “Menu” softkey.
2. Press “3” for “Tones”.
3. Press “2” for “Melody Composer”.
4. Select a memory location or existing melody
from the list. Press the “Select” softkey.
5. The composer screen is displayed. Use the
chart to compose the desired melody.
Key
Note
1
“C” - The first note in the musical
scale.(do)
2
3
4
5
6
7
8
“D” (re)
“E” (mi)
“F” (fa)
“G” (soh)
“A” (la)
“B” (ti)
Move a note an octave higher or
lower
October 31, 2001
SGH-Q105
69
Menu Functions
SGH-Q105 User Manual
Key
Note
“Next”
Softkey
Inserts the same note again.
“C” key
Delete a note.
Up or
Move a note a semi-tone up or
down.
Down
Naviga-
tion keys
Left Nav-
igation
key
Change the length of a note.
“Listen”
softkey
Listen to your melody.
Modify your melody.
“Modify”
softkey
Note: Use the “Next” softkey to select the previous
notes when trying to modify.
6. Listen to the new melody by pressing the
“Listen” softkey.
7. Press the “Save” softkey to indicate that you
are satisfied with the melody.
8. Enter a name for the new tone.
9. Press the “OK” softkey to save.
10. Press the “Yes” softkey to save the new tone as
the ring tone or “No” to just save in memory
without changing the existing ring tone.
70
SGH-Q105
October 31, 2001
Tones
Deleting a Melody
1. Select the melody that you want to delete
from the melody composer list. Press the
“Select” softkey.
2. The composer screen is displayed with the
notes.
3. Press the “Delete” softkey .
4. Press the “Yes” softkey to confirm deletion.
Ring Volume
This setting allows you to adjust the desired ringer
volume of the phone. There are five different
levels of ringer volume. Use the volume keys
located on the side of the phone to move the
volume up or down.
Setting the ringer volume:
1. Press the “Menu” softkey.
2. Press “3” for “Tones”.
3. Press “3” for “Ring Volume”.
4. Use the Volume button located on the side of
the phone to adjust the levels up or down.
5. Press the “OK” softkey to save desired volume
level.
Alert Type
Allows you to configure how to be informed when
new incoming calls are received. The following
options are available:
• Light only - Just the backlight is switched
On with the caller ID information if
available. The phone does not ring or
vibrate.
• Melody - The phone rings using the
selected melody.
October 31, 2001
SGH-Q105
71
Menu Functions
SGH-Q105 User Manual
• Vibration - The phone vibrates when an
incoming call is received. No ringer is
heard.
• Vibra+Melody - The phone vibrates and
rings when a new call is received.
To set the alert type:
1. Press the “Menu” softkey.
2. Press “3” for “Tones”.
3. Press “4” for “Alert Type”.
4. Select the desired option and press the
“Select” softkey.
Keypad Tone
Allows you to select the key tone type of tone that
the keypad generates when the different keys are
pressed.
The following options are available:
• Off - No sounds are made when the keys
are pressed.
• Tone - Each key makes a unique sound
when pressed. (Standard phone tones).
• Beep - each key makes the same beep noise
when pressed.
To set the type of keypad tone:
1. Press the “Menu” softkey.
2. Press “3” for “Tones”.
3. Press “5” for “Keypad Tone”.
4. Select the desired option and press the
“Select” softkey.
Key Volume
Allows you to adjust the volume of the key tone
when the keys are pressed on the keypad. The keys
can also be configured to be silent.
72
SGH-Q105
October 31, 2001
Tones
To set the key volume:
1. Press the “Menu” softkey.
2. Press “3” for “Tones”.
3. Press “6” for “Key Volume”.
4. Select the desired level using the navigation
or volume keys and press the “OK” softkey.
To turn the key volume Off:
1. Press the “Menu” softkey.
2. Press “3” for “Tones”.
3. Press “5” for “Key pad Tone”.
4. Press “1” for “Off”.
Message Tone
This setting allows you to select how the phone
informs you that a new message has been received.
Note: During a call, the message tone will not
sound when a new SMS message is received.
Instead, the light only indicates a new message is
available.
The following options are displayed:
• SMS Tone - Selects the alert for an
incoming SMS message. The available
choices are:
•
Mode
— Light Only
— Vibration
— Single
— Periodic
•
Tones
— SMS Tone 1-10
October 31, 2001
SGH-Q105
73
Menu Functions
SGH-Q105 User Manual
• CB Tone - Selects an alert for an incoming
cell broadcast.
— Off
— CB Tone 1-3
To set the message tone:
1. Press the “Menu” softkey.
2. Press “3” for “Tones”.
3. Press “7” for “Message Tone”.
4. Press “1” for “SMS Tone”
5. Press “1” for “Mode”
Or
Press “2” for “Tones”.
6. Select the desired option and press the
“Select” softkey.
Error Tone
This setting allows you to select how the phone
informs you when you make a mistake.
The following options are available:
• Off - The phone does not beep when an
error occurs.
• On - The phone sounds a beep tone when a
mistake is made.
To set the error tone:
1. Press the “Menu” softkey.
2. Press “3” for “Tones”.
3. Press “8” for “Error Tone”.
Minute Minder
This setting allows you to have the phone beep
every minute when you are on an outgoing call.
This helps keep you informed of the length of the
call.
74
SGH-Q105
October 31, 2001
Tones
The following options are available:
• Off - The phone does not beep.
• On - The phone beeps every minute.
To set the minute minder:
1. Press the “Menu” softkey.
2. Press “3” for “Tones”.
3. Press “9” for “Minute Minder”.
Connect Tone
This setting allows you to have the phone beep
when it connects to the network.
The following options are available:
• Off - The phone does not beep.
• On - The phone beeps when your call is
accepted.
To set the connect tone:
1. Press the “Menu” softkey.
2. Press “3” for “Tones”.
3. Press “0” for “Connect Tone”.
4. Select the desired level using the navigation
or volume keys and press the “OK” softkey.
October 31, 2001
SGH-Q105
75
Menu Functions
SGH-Q105 User Manual
Phone Settings
The phone settings menu allows you to configure
the phone preferences to make the phone easier
to use. The following options are available in the
Phone settings menu:
• Background Image
• Greeting Message
• Own Number
• Language
• Light
• Auto Redial
• Active Flip
• Anykey Answer
• LCD Contrast
• Car Kit Answer
• Reset Settings
Background Image
The background image is displayed when the
phone is in idle mode. The phone has several
different choices:
• OFF
• Analog Clock
• My Message
• My Image 1
• My Image 2
• My Image 3
To set the background image:
1. Press the “Menu” softkey.
2. Press “4” for “Phone Settings”.
3. Press “1” for “Background Image”.
4. Select the desired option and press the
“Select” softkey.
76
SGH-Q105
October 31, 2001
Phone Settings
Greeting Message
The greeting message allows you to set up a
personal greeting message that displays for a few
seconds when the phone is turned On.
To enter a greeting message:
1. Press the “Menu” softkey.
2. Press “4” for “Phone Settings”.
3. Press “2” for “Greeting Message”.
4. Enter the desired message using the keypad.
5. Press the “OK” softkey to save.
Own Number
This menu allows you to enter your own name and
number. If you have subscribed to ALS
(Alternative Line Service), you can switch between
services.
To access the own number menu:
1. Press the “Menu” softkey.
2. Press “4” for “Phone Settings”.
3. Press “3” for “Own Number”.
Language
Your phone supports different languages in
addition to English. The text and voice features
are changed when the language setting is changed.
The languages that are supported are:
• English
• Español
• Français
To access the language menu:
1. Press the “Menu” softkey.
2. Press “4” for “Phone Settings”.
3. Press “4” for “Language”.
October 31, 2001
SGH-Q105
77
Menu Functions
SGH-Q105 User Manual
Light
This menu allows you to set the backlight and
service light settings for the phone.
Note: If you turn off the backlight, there is an
increase in the amount of available talk time.
The following options are available:
Backlight
This option allows you to configure the settings for
the backlight.
The following options are available:
•
•
Off - The backlight is not used.
Short - The backlight is turned On when
you press a key or receive a call. It turns
Off 10 seconds after the last key is
pressed.
•
Long - The backlight is turned On when
you press a key or a call is received. It
turns Off 20 seconds after the last key is
pressed.
To access the backlight menu:
1. Press the “Menu” softkey.
2. Press “4” for “Phone Settings”
3. Press “5” for “Light”.
4. Press “1” for “Backlight”
Service Light
This setting allows you to turn On or Off the
service light located on the top of the phone. The
service light flashes to indicate service.
The following options are available:
78
SGH-Q105
October 31, 2001
Phone Settings
• On - The service light flashes when the
phone is ready for use.
• Off - The service light is not used.
To access the service light menu:
1. Press the “Menu” softkey.
2. Press “4” for “Settings”.
3. Press “5” for “Light”.
4. Press “2” for “Service Light”.
Auto Redial
This setting configures the phone to make up to
10 attempts to redial a number that is busy or not
available.
The following options are available:
• On - The option is enabled. The number is
re-dialed automatically.
• Off - The option is disabled.
To access the auto redial menu:
1. Press the “Menu” softkey.
2. Press “4” for “Phone Settings”.
3. Press “6” for “Auto Redial”.
Active Flip
This setting configures the flip to answer or ignore
an incoming call.
The following options are available:
• Disable
• Enable
To access the active flip option:
1. Press the “Menu” softkey.
2. Press “4” for “Phone Settings”.
3. Press “7” for “Active Flip”.
October 31, 2001
SGH-Q105
79
Menu Functions
SGH-Q105 User Manual
AnyKey Answer
The any-key answer setting allows you to set up the
phone to answer by pressing any key on the
keypad. The only exception are:
• Pressing the “End” key
• Pressing and holding the volume key
• Pressing the “Reject” softkey.
Once the call is rejected, it is automatically
forwarded to your voicemail.
The following anykey options are available:
• On - Enables the any-key answer option.
Any key can be used to answer the phone.
• Off - The option is disabled and you must
press the “Send” or “Accept” softkey or
open the flip to answer an incoming call.
Note: Opening the flip answers all calls.
To access the any-key answer menu:
1. Press the “Menu” softkey.
2. Press “4” for “Phone Settings”.
3. Press “8” for “Any-Key Answer”.
LCD Contrast
The contrast setting allows you to change the
contrast of the display screen. Using the navigation
button to change the contrast levels.
To access the contrast:
1. Press the “Menu” softkey.
2. Press “4” for “Phone Settings”.
3. Press “9” for “Contrast”.
4. Press the navigation button up or down until
desired result is seen on the screen.
5. Press the “OK” softkey.
80
SGH-Q105
October 31, 2001
Phone Settings
Car Kit Answer
This setting configures the phone to automatically
answer an incoming call after 3, 5, or 10 seconds.
Note: This feature is only available with the Hands
Free Car Kit accessory.
The following options are available:
• On - The option is enabled. The phone
automatically answers incoming calls.
• Off - The option is disabled.
To access the Car Kit answer menu:
1. Press the “Menu” softkey.
2. Press “4” for “Settings”.
3. Press “0” for “Car kit Answer”.
Reset Settings
This setting is used to reset the phone to the
factory default settings. Before you reset, the
phone requests a 8 digit password.
Note: The password is preset to “00000000”.
To access the reset menu:
1. Press the “Menu” softkey.
2. Press “4” for “Phone Settings”.
3. Press “*” for “Reset Settings”.
4. Enter the password and press the “OK”
softkey.
5. Press the “OK” softkey to reset the phone.
October 31, 2001
SGH-Q105
81
Menu Functions
SGH-Q105 User Manual
Organizer
The organizer feature allows you to schedule
events, create a to do list, view a calendar, set the
current date and time, set an alarm, and find out
what time it is in other cities around the world.
The following options are available in the
organizer menu:
• Calendar
• To Do List
• Time & Date
• Alarm
• Shortcut
Calendar
This feature allows you to view the days of the
calendar from 1996 - 2027.
• Use the “OK/Navigation” button to
navigate the calendar screen.
• Press the “Menu” softkey for additional
navigation options.
To view the calendar menu:
1. Press the “Menu” softkey.
2. Press “5” for “Organizer”.
3. Press “1” for “Calendar”.
To Do List
This feature allows you to make a list of important
tasks that need to be done. The list can be sorted
using priorities and deadlines.
To create a new list:
1. Press the “Menu” softkey.
2. Press “5” for “Organizer”.
3. Press “2” for “To Do List”.
4. Press the “New” softkey.
82
SGH-Q105
October 31, 2001
Organizer
5. Enter the name of the to do list.
6. Press the “OK” softkey.
7. Select the Priority level. (1= High, 2= Low).
8. Enter the desired “Until Date”. Press the “OK”
softkey.
9. Press the “Options” softkey.
10. The following options are displayed:
• New - Allows you to enter a new item.
• Mark - Allows you to mark an item or job.
• Edit - Allows you to edit an item in the list.
• Sort - Allows you to sort the list by priority
or marking status.
• Copy - Copies one item into another.
• Delete - Deletes an item.
• Delete All - Deletes all items.
• Exit - Exits the To Do List.
Time & Date
The Time & Date setting allows you to set the time,
date, world time, and the desired format to display
each on the screen.
To access the Time & Date settings:
1. Press the “Menu” softkey.
2. Press “5” for “Organizer”.
3. Press “3” for “Time & Date”.
Set Time
The set time setting allows you to set the correct
time.
To access the Set Time menu:
1. Press the “Menu” softkey.
2. Press “5” for “Organizer”.
3. Press “3” for “Time & Date”.
October 31, 2001
SGH-Q105
83
Menu Functions
SGH-Q105 User Manual
4. Press “1” for “Set Time”.
Set Date
The set date setting allows you set the correct date.
To access the Set Date menu:
1. Press the “Menu” softkey.
2. Press “5” for “Organizer”.
3. Press “3” for “Time & Date”.
4. Press “2” for “Set Date”.
World Time
This feature allows you to view the current time in
21 major cities around the world. Scroll through
the cities using the navigation key. The screen
displays the city name, current date and time, and
the time difference between the selected city and
your local time.
To access the world time menu:
1. Press the “Menu” softkey.
2. Press “5” for “Organizer”.
3. Press “3” for “Time & Date”.
4. Press “3” for “World Time”.
Format
The format setting allows you to configure how the
time and date are displayed on the screen.
The available choices are:
• Time Format:
— 24 Hours
— 12 Hours
• Date Format:
84
SGH-Q105
October 31, 2001
Organizer
— YYYY/MM/DD
— DD/MM/YYYY
— MM/DD/YYYY
To access the format screen:
1. Press the “Menu” softkey.
2. Press “5” for “Organizer”.
3. Press “3” for “Time & Date”.
4. Press “4” for “Format”.
Alarm
This setting allows you to configure an alarm to
ring at a desired time. The following alarms are
available:
• Once Alarm - The alarm sounds only one
time and is not repeated.
• Daily Alarm - The alarm sounds at the same
time every day.
• Weekly Alarm - The alarm sounds at the
same time every week.
• Remove All Alarms - Deletes the scheduled
alarms.
• Autopower - If this option is enabled, the
alarm will sound even if the phone is
switched OFF.
To access the alarm menu:
1. Press the “Menu” softkey.
2. Press “5” for “Organizer”.
3. Press “4” for “Alarm”.
4. Press:
“1” for “Once Alarm”.
“2” for “Daily Alarm”.
“3” for “Weekly Alarm”.
October 31, 2001
SGH-Q105
85
Menu Functions
SGH-Q105 User Manual
“4” for “Remove All Alarms”
“5” for “Autopower”.
5. Once an alarm is set, an alarm icon (bell) is
displayed on the screen. To cancel the alarm
when it sounds, open and close the flip or
press the “Exit” softkey.
Shortcut
The shortcut option allows you to map functions
to the OK/Navigation button and Clear key. When
the OK/Navigation button is moved up, down,
left, or right when the phone is in idle mode, the
shortcut to the menu function is performed.
The available options are:
• Key up (Calendar)
• Key down (Phone Book)
• Key right (Messages)
• Key left (Tones)
• C long press (Silent Mode)
To access the Shortcut menu:
1. Press the “Menu” softkey.
2. Press “5” for “Organizer”.
3. Press “5” for “Shortcut”.
86
SGH-Q105
October 31, 2001
Security
Security
The security menu allows you to restrict the usage
of your phone to:
• Authorized people only.
• Specific calling.
Different codes and passwords are used to protect
the features of your phone.
The following options are available in the security
menu:
• PIN Check
• Change PIN
• Phone Lock
• Change Password
• SIM Lock
• FDN Mode
• Change PIN 2
PIN Check
When the PIN check feature is enabled, the phone
requires a PIN number whenever the phone is
turned On. If the incorrect PIN is entered, the
phone will not power On.
Note: If you enter the PIN incorrectly three times,
the phone is locked. You need to call your service
provider for assistance.
The following options are available:
• Enable - You must enter a PIN each time
the phone is turned On.
• Disable - The phone power On normally
without requesting a PIN.
To access the PIN Check menu:
1. Press the “Menu” softkey.
2. Press “6” for “Security”.
October 31, 2001
SGH-Q105
87
Menu Functions
SGH-Q105 User Manual
3. Press “1” for “PIN Check”.
Change PIN
This setting allows you to change the PIN number.
The PIN feature must be enabled to access this
option. The current PIN must be entered before a
new PIN can be entered.
To access the change PIN menu:
1. Press the “Menu” softkey.
2. Press “6” for “Security”
3. Press “2” for “Change PIN”.
4. Follow the screen prompts.
Phone Lock
When this setting is enabled, the phone is locked
and requires you to enter a 4 digit password when
the phone is powered On. The password is
defaulted to “00000000” from the factory. Once
the correct password is entered, the phone
functions normally until it is switched Off.
The following options are available:
• Enable - A password is required when the
phone is powered On.
• Disable - Phone operates normally, no
passwords are required when the phone is
powered On.
To access the phone lock menu:
1. Press the “Menu” softkey.
2. Press “6” for “Security”.
3. Press “3” for “Phone Lock”.
88
SGH-Q105
October 31, 2001
Security
Change Password
This setting allows you to change the current
password in the phone. The current password
must be entered before a new password can be
entered. The password is defaulted to “00000000”
from the factory.
To access the change password menu:
1. Press the “Menu” softkey.
2. Press “6” for “Security”.
3. Press “4” for “Change Password”.
SIM Lock
When the SIM lock feature is enabled, your phone
only works with the current SIM card installed. If
the SIM Card is removed, the phone is disabled. If
a different SIM card is used, the phone still does
not work.
Note: This setting is created by the user, there is no
default. If the SIM Lock is entered incorrectly
three times, the phone is locked.
The following options are available:
• Enable - SIM lock is enable and a password
is assigned to the SIM card.
• Disable - The SIM lock is disabled. A
password is required to disable SIM lock.
To access the SIM lock menu:
1. Press the “Menu” softkey.
2. Press “6” for “Security”
3. Press “5” for “SIM Lock”.
October 31, 2001
SGH-Q105
89
Menu Functions
SGH-Q105 User Manual
FDN Mode
The FDN (Fixed Dial Number) mode, if supported
by the SIM card, allows you to restrict your
outgoing calls to a limited set of numbers. This
option can be enabled or disabled.
1. Press the “Menu” softkey.
2. Press “6” for “Security”
3. Press “6” for “FDN Mode”.
Change PIN2
The Change PIN2 feature allows you to change
your current PIN2 number to a different one. The
current number must be entered before the PIN
can be changed.
1. Press the “Menu” softkey.
2. Press “6” for “Security”
3. Press “7” for “Change PIN2”.
90
SGH-Q105
October 31, 2001
Network Services
Network Services
This menu contains the settings for the carrier’s
network that your phone is using. Please contact
your local carrier to make sure they are supported.
The following options are available is the network
services menu:
• Call Forwarding
• Call Waiting
• Network Selection
• Caller ID
Call Forwarding
This setting allows you to forward your incoming
calls to another number. When the call forwarding
option is enabled, the phone does not ring or
accept incoming calls. You can still make outgoing
calls without any problems.
The following options are available:
• Forward Always - All incoming calls are
forwarded to the specified number.
• Busy - Voice and data calls are forwarded if
you are busy on an existing call.
• No Reply - This setting allows you to
forward your voice and data calls to a
specific number if the phone is not
answered.
• Unreachable - If your phone is powered
Off, or you are not in a coverage area, your
incoming voice and data calls are
forwarded to a specific number.
• Cancel All - All call forwarding options are
cancelled and the phone is returned to
normal operation.
To set up call forwarding:
1. Press the “Menu” softkey.
October 31, 2001
SGH-Q105
91
Menu Functions
SGH-Q105 User Manual
2. Press “7” for “Network Services”
3. Press “1” for “Call Forwarding”.
4. Press:
“1” for “Forward Always”.
“2” for “Busy”.
“3” for “No Reply”.
“4” for “Unreachable”.
“5” for “Cancel”
Forward Always
To forward all incoming calls to a specific number:
1. Press the “Menu” softkey.
2. Press “7” for “Network Services”
3. Press “1” for “Call Forwarding”.
4. Press “1” for “Forward Always”.
5. Press:
“1” for “Voice Calls”
“2” for “Data Calls”
6. Press the “Activate” softkey.
7. Enter the number where you want to forward
the calls.
8. Press the “OK” softkey.
Busy
To forward all incoming calls when you are busy
on an existing call:
1. Press the “Menu” softkey.
2. Press “7” for “Network Services”
3. Press “1” for “Call Forwarding”.
4. Press “2” for “Busy”
5. Press:
“1” for “Voice Calls”.
92
SGH-Q105
October 31, 2001
Network Services
“2” for “Data Calls”.
6. Press the “Activate” softkey.
7. Enter the number where you want to forward
the calls.
8. Press the “OK” softkey.
No Reply
To forward all incoming calls to a specific number
if there is no answer:
1. Press the “Menu” softkey.
2. Press “7” for “Network Services”
3. Press “1” for “Call Forwarding”.
4. Press “3” for “No Reply”
5. Press:
“1” for “Voice Calls”.
“2” for “Data Calls”.
6. Press the “Activate” softkey.
7. Enter the number where you want to forward
the calls.
8. Press the “OK” softkey.
Unreachable
To forward all incoming calls when you are outside
of your coverage area or the phone is powered Off:
1. Press the “Menu” softkey.
2. Press “7” for “Network Services”
3. Press “1” for “Call Forwarding”.
4. Press “4” for “Unreachable”
5. Press:
“1” for “Voice Calls”.
“2” for “Data Calls”.
6. Press the “Activate” softkey.
October 31, 2001
SGH-Q105
93
Menu Functions
SGH-Q105 User Manual
7. Enter the number where you want to forward
the calls.
8. Press the “OK” softkey.
Cancel All
To cancel all the forwarding options and return
the phone to the default settings:
1. Press the “Menu” softkey.
2. Press “7” for “Network Services”
3. Press “1” for “Call Forwarding”.
4. Press “5” for “Cancel All”
Call Waiting
This setting allows you to be informed when
another person is calling when you are already on
an existing call.
The following options are available:
• Voice Calls
• Data Calls
• Cancel All
To set up call waiting:
1. Press the “Menu” softkey.
2. Press “7” for “Network Services”
3. Press “2” for “Call Waiting”.
Voice Calls
To setup call waiting for all incoming voice calls:
1. Press the “Menu” softkey.
2. Press “7” for “Network Services”
3. Press “2” for “Call Waiting”.
4. Press “1” for “Voice Calls”.
5. Press the “Activate” softkey.
94
SGH-Q105
October 31, 2001
Network Services
Data Calls
To setup call waiting for all incoming data calls:
1. Press the "Menu" softkey.
2. Press "7" for "Network Services".
3. Press "2" for "Call Waiting".
4. Press "2" for "Data Calls"
5. Press the "Activate" softkey.
Cancel All
To cancel the Call Waiting options and return the
phone to the default settings:
1. Press the “Menu” softkey.
2. Press “7” for “Network Services”
3. Press “2” for “Call Waiting”.
4. Press “3” for “Cancel All”.
Network Selection
This setting allows you to select the proper
network for the phone.
The following options are available:
• Automatic - Automatically searches to find
the network.
• Manual - List where you choose multiple
networks.
To access the network selection menu:
1. Press the “Menu” softkey.
2. Press “7” for “Network Services”.
3. Press “3” for “Network Selection”.
Automatic
To configure the phone to search for the carrier’s
network automatically:
1. Press the “Menu” softkey.
October 31, 2001
SGH-Q105
95
Menu Functions
SGH-Q105 User Manual
2. Press “7” for “Network Services”
3. Press “3” for “Network Selection”.
4. Press “1” for “Automatic”.
Manual
To manually configure the carrier’s network
settings:
1. Press the “Menu” softkey.
2. Press “7” for “Network Services”
3. Press “3” for “Network Selection”.
4. Press “2” for Manual”.
5. Select the name from the list and press the
“OK” softkey.
Caller ID
This setting allows you to view caller information
on the display screen.
The following options are available:
• Default - The default setting by the network
is used.
• Hide Number - This option hides your
number when calling someone else. It
keeps your information from showing on
the other phones display screen.
• Send Number - This option sends your
number so that the other persons display
screen shows your information.
To access the line identification menu:
1. Press the “Menu” softkey.
2. Press “7” for “Network Services”
3. Press “4” for “Caller ID”.
Default
To enable the Caller ID option:
96
SGH-Q105
October 31, 2001
Network Services
1. Press the “Menu” softkey.
2. Press “7” for “Network Services”.
3. Press “4” for “Caller ID”.
4. Press “1” for “Default”.
Hide Number
To hide your information:
1. Press the “Menu” softkey.
2. Press “7” for “Network Services”.
3. Press “4” for “Caller ID”.
4. Press “2” for “Hide Number”.
Send Number
To send your information:
1. Press the “Menu” softkey.
2. Press “7” for “Network Services”.
3. Press “4” for “Caller ID”.
4. Press “3” for “Send Number”.
October 31, 2001
SGH-Q105
97
Menu Functions
SGH-Q105 User Manual
WAP Browser
Your phone is equipped with a fully functional web
browser. The browser is different from a standard
web browser found on a desktop PC. The browser
on the phone is a text based browser. Most of the
graphics are not displayed, which allows faster
page downloads. The local carrier offers a web
based service option that supports the browser that
is installed on the phone. For more information
about subscription rates and fees, contact your
local carrier.
Launching the browser
1. Press the “Menu” softkey.
2. Press “8” for “WAP Browser”.
Note: You can also press the “Internet” key for
quick launch of the browser.
Note: Press “End” to exit the browser.
Navigating in the Browser
The navigation controls of the browser are the
keypads and buttons on the phone. Use the
softkeys and keypad to navigate to the desired
location.
The following options are available in the browser:
• Home - Returns to the browser home page.
• http:// - Allows you to enter a web address
using the keypad.
• Clear Cache - Deletes the cache files saved
in memory.
98
SGH-Q105
October 31, 2001
Understanding Signal Strength
Usage Guidelines:
Performance and Safety
Understanding Signal Strength
The quality of each call you make or receive, is
dependent upon the signal strength in your area.
Your phone informs you of the current signal
strength by displaying a icon. The more bars
displayed, the stronger the signal. The signal
strength indicator (
) displays in the upper
left corner of your display screen.
Specifications are Subject to Change
The information contained in this manual is
believed to be correct at the time of printing,
however, Samsung reserves the right to change or
modify any of the specifications without notice or
obligation to update existing units.
Exposure To Radio Frequency
Signals
Your wireless handheld portable telephone is a low
power radio transmitter and receiver. When it is
ON, it receives and also transmits radio frequency
(RF) signals
In August, 1996. the Federal Communications
Commission (FCC) adopted RF exposer
guidelines with safety levels for hand-held wireless
phones. Those guidelines are consistent with the
safety standards previously set by both U.S. and
international standards bodies:
• ANSI C95.1 (1992)
• NCRP Report 86 (1986)
• ICNIRP (1996)
August 31, 2001
SGH-Q105
99
Usage Guidelines: Performance and Safety
SGH-Q105 User Manual
Those standards were based on comprehensive
and periodic evaluations of the relevant scientific
literature. For example, over 120 scientists,
engineers, and physicians from universities,
government health agencies, and industry
reviewed the available body of research to develop
the ANSI standard (C95.1).
The design of your phone complies with the FCC
guidelines (and those standards).
Antenna Care
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications,
or attachments could damage the phone and may
violate FCC regulations.
Phone Operation
NORMAL POSITION: Hold the phone as you
would any other telephone with the antenna
pointed up and over your shoulder.
Operating a Motor Vehicle
Check the laws and regulations on the use of
wireless telephones in the areas where you drive.
Always obey them. Also, if using your phone while
driving, please:
• Give full attention to driving - driving safely
is your first responsibility.
• Use hands free operation, if available.
Electronic Devices
Most modern electronic equipment is shielded
from RF signals. However, certain electronic
equipment may not be shielded against the RF
signals from your wireless phone.
100
SGH-Q105
August 31, 2001
Electronic Devices
Pacemakers
The Health Industry Manufacturers Association
recommends that a minimum separation of six
(6”) inches be maintained between a handheld
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These
recommendations are consistent with the
independent research by and recommendations of
Wireless Technology Research.
Persons with pacemakers:
• Should ALWAYS keep the phone more
than six inches from their pacemaker when
the phone is turned ON;
• Should not carry the phone in a breast
pocket;
• Should use the ear opposite the pacemaker
to minimize the potential for interference;
• If you have any reason to suspect that
interference is taking place, turn your
phone OFF immediately.
Other Medical Devices
If you use any other personal medical device,
consult the manufacturer of your device to
determine if they are adequately shielded from
external RF energy. Your physician may be able to
assist you in obtaining this information.
Turn your phone Off in health care facilities when
any regulations posted in these areas instruct you
to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
August 31, 2001
SGH-Q105
101
Usage Guidelines: Performance and Safety
SGH-Q105 User Manual
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should
also consult the manufacturer of any equipment
that has been added to your vehicle.
Posted Facilities
Turn your phone Off in any facility where posted
notices so require.
Aircraft
FCC regulations prohibit using your phone while
in the air. Switch Off your phone before boarding
an aircraft.
Blasting Areas
To avoid interfering with blasting operations, turn
your phone Off when in a “blasting area” or in
areas posted: “Turn off two-way radio”. Obey all
signs and instructions.
Potentially Explosive Atmospheres
Turn your phone Off when in any area with a
potential explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or
even death.
Areas with a potentially explosive atmosphere are
often, but not always clearly marked. They include
fueling areas such as gasoline stations; below deck
on boats; fuel or chemical transfers or storage
facilities; vehicles using liquefied petroleum gas
(such as propane or butane); areas where the air
contains chemicals or particles, such as grain, dust,
or metal powders; any other area where you would
normally be advised to turn Off your vehicle
engine.
102
SGH-Q105
August 31, 2001
For Vehicles Equipped with an Air bag
For Vehicles Equipped with an Air bag
An air bag inflates with tremendous force. DO
NOT place objects, including both installed or
portable wireless equipment, in the area over the
air bag or in the air bag deployment area. If in-
vehicle wireless equipment is improperly installed
and the air bag inflates, serious injury could result.
Storing your phone
You must not store or carry your phone, its parts,
or accessories in the same compartment or other
area where there flammable liquids, gases, or
explosive or flammable materials.
Cautions
Any changes or modifications to your phone not
expressly approved in this document could void
your warranty for this equipment and void your
authority to operate this equipment.
Only use approved batteries, antennas, and
chargers. The use of any unauthorized accessories
may be dangerous and will invalidate the phone
warranty if said accessories cause damage or a
defect to the phone.
Although your phone is quite sturdy, it is a
complex piece of hardware and can be broken.
Use common-sense guidelines to avoid dropping,
hitting, bending, or sitting on it.
Information to User
This equipment has been tested and found to
comply with the limits of a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
August 31, 2001
SGH-Q105
103
Usage Guidelines: Performance and Safety
SGH-Q105 User Manual
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation; if this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more of
the following measures:
1. Reorient / Relocate the receiving antenna.
2. Increase the separation between the
equipment and receiver.
3. Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
4. Consult the dealer or an experienced radio/
TV technician for help.
CAUTION: Changes or modifications not
expressly approved by the manufacturer
responsible for compliance could void the user’s
authority to operate the equipment.
104
SGH-Q105
August 31, 2001
Cautions
Your Phone as a Network
Device
Your telephone requires a service provider to send
and receive calls. Your phone is only one part of a
system or “network” of devices that makes it
possible for you to send and receive calls, text
messages, voice message, access the Internet using
the minibrowser, and to take advantage of all of
the other services and features available when your
phone is used with your service provider.
FCC and Industry Canada
Notice
Cautions
Any changes or modifications to your phone not
expressly approved in this document could void
your warranty for this equipment and void your
authority to operate this equipment.
Only use approved batteries, antennas, and
chargers. The use of any unauthorized accessories
may be dangerous and will invalidate the phone
warranty if said accessories cause damage or a
defect to the phone.
Although your phone is quite sturdy, it is a
complex piece of hardware and can be broken.
Use common-sense guidelines to avoid dropping,
hitting, bending or sitting on it.
FCC Compliance Information
This device complies with part 15 of the FCC
Rules. Operation and is subject to the condition
that this device does not cause harmful
interference.
August 31, 2001
SGH-Q105
105
Safety Information
SGH-Q105 User Manual
Owner’s Record
The model number, regulatory number and serial
number are located on a nameplate inside the
battery compartment. Record the serial number in
the space provided below. This will be helpful if
you need to contact us about your phone in the
future.
Model:
Serial No.:
Safety Information
The U.S. Food and Drug Administration’s Center
for Devices and Radiological Health Consumer
Update on Mobile Phones
FDA has been receiving inquiries about the safety
of mobile phones, including cellular phones and
PCS phones. The following summarizes what is
known--and what remains unknown--about
whether these products can pose a hazard to
health, and what can be done to minimize any
potential risk. This information may be used to
respond to questions.
Why the concern?
Mobile phones emit low levels of radio frequency
energy (i.e., radio frequency radiation) in the
microwave range while being used. They also emit
very low levels of radio frequency energy (RF),
considered non-significant, when in the stand-by
mode. It is well known that high levels of RF can
produce biological damage through heating
effects (this is how your microwave oven is able to
cook food). However, it is not known whether, to
what extent, or through what mechanism, lower
levels of RF might cause adverse health effects as
106
SGH-Q105
August 31, 2001
Owner’s Record
well. Although some research has been done to
address these questions, no clear picture of the
biological effects of this type of radiation has
emerged to date. Thus, the available science does
not allow us to conclude that mobile phones are
absolutely safe, or that they are unsafe. However,
the available scientific evidence does not
demonstrate any adverse health effects associated
with the use of mobile phones.
What kinds of phones are in question?
Questions have been raised about hand-held
mobile phones, the kind that have a built-in
antenna that is positioned close to the user’s head
during normal telephone conversation. These
types of mobile phones are of concern because of
the short distance between the phone’s antenna--
the primary source of the RF--and the person’s
head. The exposure to RF from mobile phones in
which the antenna is located at greater distances
from the user (on the outside of a car, for
example) is drastically lower than that from hand-
held phones, because a person’s RF exposure
decreases rapidly with distance from the source.
The safety of so-called “cordless phones,” which
have a base unit connected to the telephone
wiring in a house and which operate at far lower
power levels and frequencies, has not been
questioned.
How much evidence is there that hand-held
mobile phones might be harmful?
Briefly, there is not enough evidence to know for
sure, either way; however, research efforts are on-
going. The existing scientific evidence is
conflicting and many of the studies that have been
done to date have suffered from flaws in their
August 31, 2001
SGH-Q105
107
Safety Information
SGH-Q105 User Manual
research methods. Animal experiments
investigating the effects of RF exposures
characteristic of mobile phones have yielded
conflicting results. A few animal studies, however,
have suggested that low levels of RF could
accelerate the development of cancer in
laboratory animals. In one study, mice genetically
altered to be predisposed to developing one type
of cancer developed more than twice as many such
cancers when they were exposed to RF energy
compared to controls. There is much uncertainty
among scientists about whether results obtained
from animal studies apply to the use of mobile
phones. First, it is uncertain how to apply the
results obtained in rats and mice to humans.
Second, many of the studies that showed increased
tumor development used animals that had already
been treated with cancer-causing chemicals, and
other studies exposed the animals to the RF
virtually continuously--up to 22 hours per day.
For the past five years in the United States, the
mobile phone industry has supported research
into the safety of mobile phones. This research has
resulted in two findings in particular that merit
additional study:
1.In a hospital-based, case-control study,
researchers looked for an association between
mobile phone use and either glioma (a type of
brain cancer) or acoustic neuroma (a benign
tumor of the nerve sheath). No statistically
significant association was found between mobile
phone use and acoustic neuroma. There was also
no association between mobile phone use and
gliomas when all types of types of gliomas were
considered together. It should be noted that the
108
SGH-Q105
August 31, 2001
Owner’s Record
average length of mobile phone exposure in this
study was less than three years.
When 20 types of glioma were considered
separately, however, an association was found
between mobile phone use and one rare type of
glioma, neuroepithelliomatous tumors. It is
possible with multiple comparisons of the same
sample that this association occurred by chance.
Moreover, the risk did not increase with how often
the mobile phone was used, or the length of the
calls. In fact, the risk actually decreased with
cumulative hours of mobile phone use. Most
cancer causing agents increase risk with increased
exposure. An ongoing study of brain cancers by
the National Cancer Institute is expected to bear
on the accuracy and repeatability of these results.
2.Researchers conducted a large battery of
laboratory tests to assess the effects of exposure to
mobile phone RF on genetic material. These
included tests for several kinds of abnormalities,
including mutations, chromosomal aberrations,
DNA strand breaks, and structural changes in the
genetic material of blood cells called lymphocytes.
None of the tests showed any effect of the RF
except for the micronucleus assay, which detects
structural effects on the genetic material. The cells
in this assay showed changes after exposure to
simulated cell phone radiation, but only after 24
hours of exposure. It is possible that exposing the
test cells to radiation for this long resulted in
heating. Since this assay is known to be sensitive to
heating, heat alone could have caused the
abnormalities to occur. The data already in the
literature on the response of the micronucleus
August 31, 2001
SGH-Q105
109
Safety Information
SGH-Q105 User Manual
assay to RF are conflicting. Thus, follow-up
research is necessary.
FDA is currently working with government,
industry, and academic groups to ensure the
proper follow-up to these industry-funded
research findings. Collaboration with the Cellular
Telecommunications Industry Association (CTIA)
in particular is expected to lead to FDA providing
research recommendations and scientific
oversight of new CTIA-funded research based on
such recommendations.
Two other studies of interest have been reported
recently in the literature:
1. Two groups of 18 people were exposed to
simulated mobile phone signals under laboratory
conditions while they performed cognitive
function tests. There were no changes in the
subjects’ ability to recall words, numbers, or
pictures, or in their spatial memory, but they were
able to make choices more quickly in one visual
test when they were exposed to simulated mobile
phone signals. This was the only change noted
among more than 20 variables compared.
2. In a study of 209 brain tumor cases and 425
matched controls, there was no increased risk of
brain tumors associated with mobile phone use.
When tumors did exist in certain locations,
however, they were more likely to be on the side of
the head where the mobile phone was used.
Because this occurred in only a small number of
cases, the increased likelihood was too small to be
statistically significant.
In summary, we do not have enough information
at this point to assure the public that there are, or
are not, any low incident health problems
110
SGH-Q105
August 31, 2001
Owner’s Record
associated with use of mobile phones. FDA
continues to work with all parties, including other
federal agencies and industry, to assure that
research is undertaken to provide the necessary
answers to the outstanding questions about the
safety of mobile phones.
What is known about cases of human cancer that
have been reported in users of hand-held mobile
phones?
Some people who have used mobile phones have
been diagnosed with brain cancer. But it is
important to understand that this type of cancer
also occurs among people who have not used
mobile phones. In fact, brain cancer occurs in the
U.S. population at a rate of about 6 new cases per
100,000 people each year. At that rate, assuming 80
million users of mobile phones (a number
increasing at a rate of about 1 million per month),
about 4800 cases of brain cancer would be
expected each year among those 80 million
people, whether or not they used their phones.
Thus it is not possible to tell whether any
individual’s cancer arose because of the phone, or
whether it would have happened anyway. A key
question is whether the risk of getting a particular
form of cancer is greater among people who use
mobile phones than among the rest of the
population. One way to answer that question is to
compare the usage of mobile phones among
people with brain cancer with the use of mobile
phones among appropriately matched people
without brain cancer. This is called a case-control
study. The current case-control study of brain
cancers by the National Cancer Institute, as well as
August 31, 2001
SGH-Q105
111
Safety Information
SGH-Q105 User Manual
the follow-up research to be sponsored by industry,
will begin to generate this type of information.
What is FDA’s role concerning the safety of mobile
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as
mobile phones before marketing, as it does with
new drugs or medical devices. However, the agency
has authority to take action if mobile phones are
shown to emit radiation at a level that is hazardous
to the user. In such a case, FDA could require the
manufacturers of mobile phones to notify users of
the health hazard and to repair, replace or recall
the phones so that the hazard no longer exists.
Although the existing scientific data do not justify
FDA regulatory actions at this time, FDA has urged
the mobile phone industry to take a number of
steps to assure public safety. The agency has
recommended that the industry:
• support needed research into possible biological
effects of RF of the type emitted by mobile phones;
• design mobile phones in a way that minimizes
any RF exposure to the user that is not necessary
for device function; and
• cooperate in providing mobile phone users with
the best possible information on what is known
about possible effects of mobile phone use on
human health.
At the same time, FDA belongs to an interagency
working group of the federal agencies that have
responsibility for different aspects of mobile
phone safety to ensure a coordinated effort at the
federal level. These agencies are:
112
SGH-Q105
August 31, 2001
Owner’s Record
• National Institute for Occupational Safety and
Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Health and Safety Administration
• National Telecommunications and Information
Administration
The National Institutes of Health also participates
in this group.
In the absence of conclusive information about
any possible risk, what can concerned individuals
do?
If there is a risk from these products--and at this
point we do not know that there is--it is probably
very small. But if people are concerned about
avoiding even potential risks, there are simple
steps they can take to do so. For example, time is a
key factor in how much exposure a person
receives. Those persons who spend long periods of
time on their hand-held mobile phones could
consider holding lengthy conversations on
conventional phones and reserving the hand-held
models for shorter conversations or for situations
when other types of phones are not available.
People who must conduct extended conversations
in their cars every day could switch to a type of
mobile phone that places more distance between
their bodies and the source of the RF, since the
exposure level drops off dramatically with
distance. For example, they could switch to:
• a mobile phone in which the antenna is located
outside the vehicle,
• a hand-held phone with a built-in antenna
connected to a different antenna mounted on the
August 31, 2001
SGH-Q105
113
Safety Information
SGH-Q105 User Manual
outside of the car or built into a separate package,
or
• a headset with a remote antenna to a mobile
phone carried at the waist.
Again, the scientific data do not demonstrate that
mobile phones are harmful. But if people are
concerned about the radio frequency energy from
these products, taking the simple precautions
outlined above can reduce any possible risk.
Where can I find additional information?
For additional information, see the following
websites:
Federal Communications Commission (FCC) RF
Safety Program (select “Information on Human
Exposure to RF Fields from Cellular and PCS
Radio Transmitters”): http://www.fcc.gov/oet/
rfsafety
World Health Organization (WHO) International
Commission on Non-Ionizing Radiation
Protection (select Qs & As): http://www.who.int/
emf
United Kingdom, National Radiological
Protection Board: http://www.nrpb.org.uk
Cellular Telecommunications Industry Association
(CTIA): http://www.wow-com.com
U.S. Food and Drug Administration (FDA) Center
for Devices and Radiological Health: http://
www.fda.gov/cdrh/consumer/
114
SGH-Q105
August 31, 2001
A
Access Codes 33
Accessories 16
Active Flip 79
Alarm 85
Alert Type 71
Answering a Call 41
Antenna 20
Any-Key Answer 80
Auto Redial 79
B
Background Image 76
Backlight 23
Battery - Charging 32
Battery - Installing/Removing 32
Battery - Low Indicator 33
Busy 92
C
Calendar 82
Call Forwarding 91
Call Functions 39
Call Records 57
Call Time 59
Call Waiting 46, 94
Caller ID 96
Conference Calling 46
Connect Tone 75
Correcting a Number 39
D
Delete All 59
Deleting a Melody 71
Display Screen 21
E
Ending a Call 40
Entry Mode - Changing 51
Error 74
October 31, 2001
SGH-Q105
115
Error Tone 74
F
Flip Cover 23
Forward Always 92
Front View of the SGH-Q105 17
Functions and Options 35
G
Greeting Message 77
H
Hide Number 97
Hold 45
I
Incoming Calls 58
International Calls 39
InUse Menu 44
K
Keypad 19
Keypad Tone 72
L
Language 77
Last Number Redial 40
Launching the browser 98
LCD Contrast 80
Light 78
Lowercase Entry 51
M
Making a Call 39
Making a Call using the Phone Book 40
Melody Composer 68
Menu Browse Keys 18
Menu Functions 57
Menu Tree 24
Message Tone 73
Messages 61
Minute Minder 74
Missed Calls 42, 57
116
SGH-Q105
October 31, 2001
Mute/Send Keys 44
Mute/Unmute 44
N
Navigating in the Browser 98
Navigation Button 18
Network Services 91
No Replay 93
Number Entry 51
O
Organizer 82
Outgoing Calls 58
Own Number 77
P
Phone Book 52
Phone Book - Accessing Options 53
Phone Book - Caller Group 55
Phone Book - Copy 54
Phone Book - Edit 54
Phone Book - Erase 54
Phone Book - Paste 53
Phone Book Options 53
Phone Password 33
Phone Settings 76
Phonebook 45
PIN 34
Preset Message List 63
PUK 34
R
Reading Messages 61
Reset Settings 81
Ring Tone 68
Ring Volume 71
S
Screen Backlight 20
Searching and Dialing a Number 55
Send Number 97
October 31, 2001
SGH-Q105
117
Send/End Keys 18
Service Light Indicator 23
Set Date 84
Set Time 83
Shortcut 86
SIM Card 31
SIM Card - Installing 31
SIM Lock 89
SMS Service 45
SoftKeys 18
Storing a New Number 52
T
T9 Word Entry 49
Time & Date 83
To Do List 82
Tones 68
Turning the Phone On/Off 33
U
Unreachable 93
Uppercase Entry 50
Usage guidelines 99
V
Voice Mail Messages 66
Volume - Adjusting 41
Volume Buttons 22
W
WAP Browser 98
World Time 84
Write Messages 62
Y
Your Consumer Package 15
118
SGH-Q105
October 31, 2001
|
