English
Compact Disc Changer
C-707CHX
Instruction Manual
COMPACT DISC CHANGER
DUAL OPTICAL OUTPUT
DISC
DISC
DISC
1
2
3
3
DISC CHANGER
STANDBY/ON
STANDBY
DISC MODE
DISPLAY
DISC
C-707CHX
Important Safeguards
10. Power Sources – The appliance should be
1. Read Instructions – All the safety and
operating instructions should be read before
the appliance is operated.
connected to a power supply only of the type
described in the operating instructions or as
marked on the appliance.
2. Retain Instructions – The safety and
operating instructions should be retained for
future reference.
11. Polarization –If the appliance is provided with a
polarized plug having one blade wider than the
other, please read the following information:
The polarization of the plug is a safety feature.
The polarized plug will only fit the outlet one
way. If the plug does not fit fully into the outlet,
try reversing it. If there is still trouble, the user
should seek the services of a qualified electrician.
Under no circumstances should the user attempt
to defeat the polarization of the plug.
3. Heed Warnings – All warnings on the
appliance and in the operating instructions
should be adhered to.
4. Follow Instructions – All operating and use
instructions should be followed.
5. Water and Moisture – The appliance should
not be used near water – for example, near a
bathtub, washbowl, kitchen sink, laundry tub,
in a wet basement, or near a swimming pool,
and the like.
12. Power-Cord Protection – Power-supply
cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them, especially near
plugs, convenience receptacles, and the point
where they exit from the appliance.
6. Carts and Stands – The appliance should be
used only with a cart or stand that is
recommended by the manufacturer.
6A. An appliance and cart
13. Cleaning – The appliance should be cleaned
PORTABLE CART WARNING
combination should be
moved with care. Quick
stops, excessive force, and
uneven surfaces may cause
the appliance and cart
only as recommended by the manufacturer.
14. Nonuse Periods – The power cord of the
appliance should be unplugged from the outlet
when left unused for a long period of time.
15. Object and Liquid Entry –Care should be taken
sothatobjectsdonotfallandliquidsarenotspilled
into the enclosure through openings.
S3125A
combination to overturn.
7. Wall or Ceiling Mounting – The appliance
should be mounted to a wall or ceiling only
as recommended by the manufacturer.
16. Damage Requiring Service – The appliance
should be serviced by qualified service
personnel when:
8. Ventilation – The appliance should be
situated so that its location or position does
not interfere with its proper ventilation. For
example, the appliance should not be situated
on a bed, sofa, rug, or similar surface that
may block the ventilation openings; or if
placed in a built-in installation, such as a
bookcase or cabinet that may impede the flow
of air through the ventilation openings, there
should be free space of at least 5 cm (2 in.)
and an opening behind the appliance.
A. The power-supply cord or the plug has
been damaged; or
B. Objects have fallen, or liquid has been
spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate
normally or exhibits a marked change in
performance; or
E. The appliance has been dropped, or the
enclosure damaged.
9. Heat – The appliance should be situated away
from heat sources such as radiators, heat
registers, stoves, or other appliances (including
amplifiers) that produce heat.
17. Servicing – The user should not attempt to
service the appliance beyond that described in
the operating instructions. All other servicing
should be referred to qualified service personnel.
3
Precautions
1. Warranty Claim
5. Care
You can find the serial number on the rear panel From time to time you should wipe the front and
of this unit. In case of warranty claim, please re- rear panels and the cabinet with a soft cloth. For
port this number.
heavier dirt, dampen a soft cloth in a weak solu-
tion of mild detergent and water, wring it out dry,
and wipe off the dirt. Following this, dry immedi-
ately with a clean cloth.
Do not use rough material, thinners, alcohol or
other chemical solvents or cloths since these could
damage the finish or remove the panel lettering.
2. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST
TIME, READ THE FOLLOWING SECTION CARE-
FULLY.
The voltage of the available power supply differs
according to country or region. Be sure that the
power supply voltage of the area where this unit
will be used meets the required voltage (e.g., AC
230 V, 50 Hz or AC 120 V, 60 Hz) written on the
rear panel.
Turning off the standby button does not shut off
the power completely. So the power cord should
be removed from the AC outlet when the unit is
not used for a prolonged time.
6. Points to remember
If this unit is brought from a cold environment to
a warm one or is in a cold room that is quickly
heated, condensation may form on the pickup,
preventing proper operation. In this case, remove
the disc and leave the power ON for about one
hour to remove the condensation.
When transporting this unit, be careful not to
bump it.
3. Do not touch this unit with wet hands
Do not handle this unit or power cord when your
hands are wet or damp. If water or any other liq-
uid enters the case, take this unit to an authorized
service center for inspection.
DANGER:
INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCK FAILED OR DEFEATED. AVOID DIRECT
EXPOSURE TO BEAM.
CAUTION:
4. Location of this unit
THIS PRODUCT UTILIZES A LASER. USE OF CON-
TROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
Place this unit in a well-ventilated location.
Take special care to provide plenty of ventilation
on all sides of this unit especially when it is placed
in an audio rack. If ventilation is blocked, this unit
may overheat and malfunction.
Do not expose this unit to direct sunlight or heat-
ing units as this unit’s internal temperature may
rise and shorten the life of the pickup.
Avoid damp and dusty places and places directly
affected by vibrations from the speakers. In par-
ticular, avoid placing the unit on or above one of
the speakers.
Be sure this unit is placed in a horizontal position.
Never place it on its side or on a slanted surface as
it may malfunction.
Do not place near tuners or TV sets.
If placed next to a TV or tuner, it may cause recep-
tion interference resulting in some noise in the TV
or tuner output.
4
For U.S. model
FCC INFORMATION FOR USER
The laser is covered by a housing which prevents
exposure during operation or maintenance. How-
ever, this product is classified as a Laser Product
by CDRH (Center for Devices and Radiological
Health) which is a department of the Food and
Drug Administration. According to their regula-
tions 21 CFR section 1002.30, all manufactures
who sell Laser Products must maintain records of
written communications between the manufac-
turer, dealers and customers concerning radiation
safety. If you have any complaints about instruc-
tions or explanations affecting the use of this prod-
uct, please feel free to write to the address on the
back page of this manual. When you write us,
please include the model number and serial num-
ber of your unit.
CAUTION:
The user changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
NOTE:
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio communica-
tions. However, there is no guarantee that inter-
ference will not occur in a particular installation. If
this equipment does cause harmful interference
to radio or television reception, which can be de-
termined by turning the equipment off and on,
the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
In compliance with Federal Regulations, the certi-
fication, identification and the period of manu-
facture are indicated on the rear panel.
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
5
Precautions
For Canadian model
For British model
Replacement and mounting of an AC plug on the
power supply cord of this unit should be performed
only by qualified service personnel.
NOTE:
THIS CLASS B DIGITAL APPARATUS COMPLIES
WITH CANADIAN ICES-003.
IMPORTANT
The wires in the mains lead are coloured in accor-
dance with the following code:
For models having a power cord with a polarized
plug:
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
Blue
: Neutral
Brown : Live
As the colours of the wires in the mains lead of
this apparatus may not correspond with the
coloured markings identifying the terminals in your
plug, proceed as follows:
The wire which is coloured blue must be connected
to the terminal which is marked with the letter N
or coloured black.
Modele pour les Canadien
REMARQUE:
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST
CONFORME À LA NORME NMB-003 DU CANADA.
Sur les modèles dont la fiche est polarisée:
The wire which is coloured brown must be con-
nected to the terminal which is marked with the
letter L or coloured red.
ATTENTION: POUR ÉVITER LES CHOCS
ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER IMPORTANT
JUSQU’AU FOND.
A 5 ampere fuse is fitted in this plug. Should the
fuse need to be replaced, please ensure that the
replacement fuse has a rating of 5 amperes and
that it is approved by ASTA or BSI to BS1362. Check
for the ASTA mark or the BSI mark on the body of
the fuse.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR
THE SOCKET OUTLET IN YOUR HOME, THEN THE
FUSE SHOULD BE REMOVED AND THE PLUG CUT
OFF AND DISPOSED OF SAFELY. THERE IS A DAN-
GER OF SEVERE ELECTRICAL SHOCK IF THE CUT
OFF PLUG IS INSERTED INTO ANY 13 AMPERE
SOCKET.
For European model
This unit contains a semiconductor laser system
and is classified as a “CLASS 1 LASER PRODUCT”.
So, to use this model properly, read this Instruc-
tion Manual carefully. In case of any trouble, please
contact the store where you purchased the unit.
To prevent being exposed to the laser beam, do
not try to open the enclosure.
“CLASS 1 LASER
PRODUCT”
If in any doubt, please consult a qualified electri-
cian.
1. This unit is a CLASS 1 LASER PRODUCT and
employs a laser inside the cabinet.
2. To prevent the laser from being exposed, do
not remove the cover. Refer servicing to
qualified personnel.
Declaration of Conformity
We,
ONKYO EUROPE
ELECTRONICS GmbH
INDUSTRIESTRASSE 20
82110 GERMERING,
GERMANY
declare in own responsibility, that the ONKYO product described
in this instruction manual is in compliance with the corresponding
technical standards such as EN60065, EN55013, EN55020 and
EN61000-3-2, -3-3.
GERMERING, GERMANY
A.HORIUCHI
ONKYO EUROPE ELECTRONICS GmbH
6
Table of contents
Before Using
Checking the supplied accessories ............................................... Below
Connections
Connecting to Onkyo Separate Collection series components............. 8
Connecting to the other components........................................... 9~11
Operations
Playing CDs ................................................................................ 12~17
Memory play .............................................................................. 18~20
Other play modes....................................................................... 21~22
Other Information
Handling CDs................................................................................... 23
Troubleshooting ............................................................................... 24
Specifications ................................................................................... 25
Indexed to parts and controls ..................................................... 26~27
Supplied accessories
Check that the following accessories are supplied with this unit.
remote control cable × 1
Audio connection cable × 1
7
Connecting to Onkyo Separate Collection series components
This section introduces you to the other Onkyo Separate Collection series components and their conve-
nient system functions, followed by instruction on how to connect the system.
The following Onkyo Separate Collection series components are commercially available:
• R-805X ....... FM Stereo/AM Tuner Amplifier
• A-905X ....... Integrated Stereo Amplifier
• T-405X ........ Stereo Tuner
• K-505X ....... Stereo Cassette Tape Deck (Not available in U.S and Canada)
• MD-105X ... Minidisc (MD) Recorder (Not available in U.S and Canada)
• CDR-205X .. CD Recorder (Not available in U.S and Canada)
Note that the available components may vary according to the area.
Combining the C-707CHX Compact Disc Changer with the above system components enables you to
operate the following convenient functions:
The instructions in this manual are based on using the C-707CHX along with the R-805X. If you wish to
use the A-905X, refer to the instruction manual for the A-905X and connect the C-707CH or C-705X
(instead of the C-707CHX).
• Auto Power On
– You can turn on the power to the tuner amplifier by presssing the STNADBY/ON button on one of
the system components.
– To enable the Auto Power On function, make sure that all devices are connected correctly.
• Direct Change
The R-805X’s INPUT SELECTOR automatically switches to CD, MD or TAPE when these components
are played.
• Remote Control Operation
This component can be operated using the remote controller included with the R-805X. The buttons
on the remote controller can be used to send signals to this unit. (Refer to the R-805X’s instruction
manual for details.)
• Program Timer
You can use the Timer Play. (Refer to the R-805X instruction manual for details.)
• Sleep Timer
You can fall asleep to a music/radio program with the timer. (Refer to the R-805X instruction manual
for details.)
• CD Synchro Recording
With the cassette deck, MD recorder or CD recorder in recording standby, starting CD playback
causes the cassette deck or MD recorder to start recording. (Refer to the K-505X, MD-105X and
CDR-205X instruction manuals for details.)
• CD Dubbing
Simple CD dubbing using a stereo cassette tape deck, MD recorder or CD recorder is possible with
the pressing of a single button. (Refer to the K-505X, MD-105X or CDR-205X Instruction Manual for
more information).
• DLA LINK
The Peak Search Data function of the C-707CHX enables the MD recorder or CD recorder to auto-
matically set the digital recording level. (Refer to the MD-105X or CDR-205X Instruction Manual for
details.)
8
Connecting to the other components
Before connecting
• Do not connect the AC power cord (mains lead) until you complete all the other connections includ-
ing the
connections on the next page.
• On each pair of connectors, a red connector (marked R) corresponds to the right channel, and a
white connector (marked L) to the left channel. Connect white plugs of audio connection cables to
L connectors and connect red plugs of audio connection cables to R connectors.
Audio connection cable
To L connector
To R connector
(White)
(Red)
(White)
(Red)
To L connector
To R connector
Improper connection
cable
REMOTE
CONTROL
Insert completely
COMPACT DISC CHANR
MODEL NO. C-70HX
DIGITAL OUTPUT
OPTICAL
AC OUTLET
AC 120V 60Hz
UNSWITCHED
120W 1A MAX.
RATING:
AC120V 60Hz 14W
1
2
2-1, NISSHIN-CHO, NEYAGAWA-SHI,OSAKA,
JAPAN
MADE IN JAPAN
ANALOG
OUTPUT
3
To wall outlet
AC outlet
Audio
connection
cable
L
R
DIGITAL IN
jacks
CD
Optional Optical fiber
cable
Amplifier without digital
input terminal
MD recorder, CD recorder,
DAT deck, etc.
2
1
1 Connecting to an amplifier
Connect the CD’s OUTPUT jacks and the amplifier’s CD input jacks using the audio connection cable.
Refer to the amplifier’s instruction manual for connections.
2
Connection to digital equipment, such as an MD,CD Recorder or DAT
Using the DIGITAL OUTPUT connector, you can record on digital audio equipment, such as an MD, CD
recorder, DAT, etc. For digital recording, connect the equipment to either DIGITAL OUTPUT OPTICAL 1
or 2 connector using the optical cable (option). These connectors can also be used for connecting an
amplifier which is equipped with a digital input connector.
A connector protection cap is attached to the digital output connector. Remove
this cap to connect the unit to other digital equipment. When you are not using
the digital output connector, replace this cap.
3 To AC OUTLET (UNSWITCHED)
The AC power cord of another component can be connected to this AC OUTLET connector.
This means that if the C-707CHX is plugged into an AC outlet, AC power is available to this AC OUTLET
even if the C-707CHX is off.
Note
The shape, number, and total capacity of the AC outlets may differ depending on the area where the
unit is purchased.
120 V, 60 Hz model: Capacity is 120 W in total.
9
Connecting to the other components (continued)
Connecting for remote control (
)
If your other components are made by ONKYO and those components are equipped with the
connec-
tors, you can control this unit with the amplifier’s remote controller.
Before connecting
• The amplifier must be connected in the
system hookups for
control operations.
• Each component has two connectors. There is no difference between those connectors.
• The components may be connected in any order.
• Remote control operation is not possible if only the
remote control cable is connected to the
connectors. Connect the audio connection cables correctly.
R-805X
Supplied
cable
C-707CHX
Note
An
plug is included with this unit and with every tuner and cassette deck that bears the
remote control cable equipped with a 1/8 in.(3.5mm) diameter miniature two-conductor phone
mark.
10
Connecting the power cord
(mains lead)
Using the remote controller
The unit is not shipped with a remote controller.
However, you can use a remote controller (RC-
414S/RC-456S) that is shipped with the R-805X
amplifier.
Insert the AC power cord (mains lead)
into a wall outlet. The STANDBY indi-
cator lights.
Remote controller RC-414S/RC-456S
When the remote controller RC-414S/RC-456S
supplied with the amplifier R-805X is used, oper-
ate the remote controller pointing towards the
amplifier’s remote sensor.
Be sure to make the
the connection is incomplete, you cannot use the
remote controller to operate the unit.
connection securely. If
STANDBY/ON
STANDBY
R-805X
Remote control
sensor
• If you press the OPEN/CLOSE button while
the unit is in the standby mode, the power
will turn on and the display will light up auto-
matically.
30¡
30¡
5m
C-707CHX
RC-414S / RC-456S
• To use the unit with the other Onkyo Sepa-
rate Collection series components, follow the
connection diagram in the R-805X instruction
manual to connect the unit to the system.
The RC-414S remote controller is shown in
the following illustrations.
Notes
• Place the unit away from strong light such as
direct sunlight or inverted fluorescent light which
can prevent proper operation of the remote con-
troller.
• Using another remote controller of the same
type in the same room or using the unit near
equipment which uses infrared rays may cause
operational interference.
• Do not put any object such as a book on the
remote controller. The buttons of the remote
controller may be pressed by mistake and drain
the batteries.
• Make sure the audio rack doors do not have
colored glass. Placing the unit behind such doors
may prevent proper remote controller operation.
• If there is any obstacle between the remote con-
troller and the remote control sensor, the re-
mote controller will not operate.
11
Playing CDs
G.EQUALIZER
POWER
CLOCK
SLEEP
EFFECT
MODE
TUNER
PRESET
FM
AM
INPUT
RC-414S
(Supplied with R-805X)
TAPE
STANDBY/ON
Disc tray
DVD
MD
PAUSE/STEP
COMPACT CD CHANGER
DUAL OPTICAL OUTPUT
REPEAT SCROLL
PLAY MODE CLEAR
REPEAT RANDOM
MEMORY CLEAR
REPEAT PLAY MODE
DISC
DISC
DISC
1
2
3
REC
CD
3
DISC CHANGER
DISC
CDR
STANDBY/ON
DISC MODE
TONE
CLEAR
REC
2
STANDBY
DISPLAY
DISC
TIMER
1
4
3
6
MUTING
C-707CHX
5
UP/DOWN
ENTER
7
8
9
VOLUME
ACOUSTIC
10/0 PRESENCE
--/---
OFF
1
2
3
Normal play
3
4
Place the disc in the disc tray,
with its label face up.
Label side up
1
Press the STANDBY/ON button to
turn on the unit.
The STANDBY indicator goes out.
STANDBY/ON
Place only one disc on each tray.
STANDBY
Press the
OPEN/CLOSE button
(DISC 1 - DISC 3) to close the
open disc tray.
2
Press the desired
button (DISC 1 - DISC 3).
OPEN/CLOSE
Alternatively, you may lightly press the
front face of the open disc tray.
The disc tray corresponding to the OPEN/
CLOSE button opens and the disc indicator
for the open disc tray flashes (see page 15).
DISC 1
DISC 2
DISC 3
DISC 1
DISC 2
DISC 3
Note:
You can continuously load second and
third discs in the disc trays by pressing the
buttons (DISC 1 - DISC 3).
Note:
If one of the
OPEN/CLOSE buttons (DISC 1 -
DISC 3) is pressed in STANDBY mode, the unit
turns on automatically and then the
corresponding disc tray opens.
12
G.EQUALIZER
POWER
CLOCK
SLEEP
EFFECT
MODE
RC-414S
TUNER
PRESET
FM
AM
INPUT
TAPE
(Supplied with R-805X)
DVD
MD
COMPACT CD CHANGER
DUAL OPTICAL OUTPUT
PAUSE/STEP
DISC
DISC
DISC
1
2
3
REPEAT SCROLL
PLAY MODE CLEAR
REPEAT RANDOM
MEMORY CLEAR
REPEAT PLAY MODE
REC
CD
3
DISC CHANGER
STANDBY/ON
STANDBY
DISC
CDR
DISC MODE
DISPLAY
DISC
DISC
TONE
CLEAR
REC
2
C-707CHX
TIMER
1
4
3
6
MUTING
5
DISC
UP/DOWN
ENTER
7
8
9
VOLUME
ACOUSTIC
10/0 PRESENCE
--/---
OFF
1
2
3
To pause playing
5
6
Press the DISC button once or
more to select the disc you wish
to play.
Press the
remote controller.
To resume playback, press the
the unit, or the
controller.
button, or the
button on the
button on
button on the remote
Remote controller
DISC
DISC
Remote controller
DISC 1
To stop playing
Press the button during play.
Remote controller
Press the
button.
The CD changer starts playing the first
track of the selected disc.
Remote controller
Music Calendar
DISC
DISC
DISC
1
2
3
The Music Calendar shows the numbers of the
tracks to be played. When the playback of a
track is completed, the corresponding track
number indicator turns off. If the disc contains
16 or more tracks, the “over indicator (>15)”
lights up. (The total number of the tracks on a
disc is shown on the multi-display.)
1
6
2
7
3
8
4
9
5
10
11 12 13 14 15
15
This indicator appears if the
disc has 16 tracks or more.
DISC
DISC
DISC
1
2
3
SINGLE ELAPSED
1
6
2
7
3
8
4
9
5
10
11 12 13 14 15
15
Music Calendar
DISC
DISC
DISC
1
2
3
1
6
2
7
3
8
4
9
5
10
11 12 13 14 15
15
over indicator
multi-display
13
Playing CDs (continued)
G.EQUALIZER
POWER
CLOCK
SLEEP
EFFECT
MODE
RC-414S
TUNER
PRESET
FM
AM
INPUT
TAPE
(Supplied with R-805X)
COMPACT CD CHANGER
DUAL OPTICAL OUTPUT
DVD
MD
PAUSE/STEP
DISC
DISC
DISC
1
2
3
REPEAT SCROLL
PLAY MODE CLEAR
REPEAT RANDOM
MEMORY CLEAR
REPEAT PLAY MODE
3
DISC CHANGER
REC
CD
STANDBY/ON
STANDBY
DISC MODE
DISPLAY
DISC
CDR
,
DISC
TONE
CLEAR
REC
2
C-707CHX
TIMER
1
4
3
6
MUTING
5
UP/DOWN
ENTER
7
8
9
,
Number
buttons
VOLUME
ACOUSTIC
10/0 PRESENCE
--/---
OFF
1
2
3
Skip play
Starting playback from a given
track (remote controller only)
Use the
or
button to jump to
the beginning of the previous or next track,
respectively. Pressing the button during playback
causes the CD Changer to play from the
beginning of that track
With the RC-414S remote controller (included
with the R-805X) , you can select the track to
play using the number buttons. In this case,
selecting a track automatically starts playback
from that track.
Remote controller
How to enter track numbers
Remote controller
To enter track #5
5
: Press this button during playback to
jump to the beginning of the current
track. Press it again to jump to the
beginning of the previous track.
: Press this button to jump to the
beginning of the next track.
To enter track #10
10/ 0
To enter track #21
2
1
--
/
---
Search play
Hold down the
or
button
during playback. The CD Changer will start
playback from where you release your finger.
: fast-rewind
: fast-forward
Note:
During Memory play, searching is performed
only for those tracks stored in the memory. (See
pages 18 to 20 for Memory play.)
14
Notes:
Understanding the meaning of
disc indicators
• This CD Changer has three disc trays that slide
forward and backward internally. Note that
pressing any of the buttons will cause the
all the trays to change position, either in or
out, or forward or backward.
• Be sure that the internal disc trays have
stopped moving before changing the disc.
• When removing a disc, be careful not to
scratch the disc that may exist in the disc tray
below. This is especially important when
removing a CD-single.
DISC 1
DISC 2
DISC 3
Boxed: The disc is playing or ready for playback.
A disc is loaded in the disc tray.
Flashing:The disc tray is open.
On:
Off:
No disc is loaded in the disc tray.
Note:
The disc indicator stays lit until the presence/
absence detection is completed, even if the disc
tray holds no discs.
Changing the discs during
playback
DISC 1
DISC 1
DISC 2
DISC 2
DISC 3
DISC 3
The C-707CHX allows you to change the other
two discs while one disc is playing.
When one disc is playing, press the button
(DISC 1 - DISC 3) for another disc tray.
The disc indicator for the open disc tray flashes.
Replace the disc in the disc tray and press the
button to close the disc tray.
If the button for the playing disc is
pressed...
Playback stops and the tray holding that disc
opens.
IMPORTANT!
During recording, pressing the button for the
tray holding the playing disc stops the recording.
15
Playing CDs (continued)
COMPACT CD CHANGER
DUAL OPTICAL OUTPUT
DISC
DISC
DISC
1
2
3
3
DISC CHANGER
STANDBY/ON
STANDBY
DISC MODE
DISPLAY
DISC
C-707CHX
DISC MODE
Selecting the disc mode
Each time you press the DISC MODE button, the
disc mode will change in the following
sequence:
DISC MODE
TR-1
Normal play
TR-1
1DISC
(No indication made)
(The current disc mode is shown by the disc
mode indicators.)
1 DISC
Off
TR-1 mode (hit-parade function): When
loaded with CD-singles, the CD Changer plays
only the first tracks of discs. The unit
automatically stops when the first tracks of all
discs have been played back. This mode is useful
when you play only the first tracks of one CD-
single after another.
1DISC mode: The CD Changer plays only the
currently selected disc. When finished, the unit
stops without playing the next CD.
Normal play (No indication made): When
finished playing the disc’s final track, the CD
Changer immediately starts playing the next
disc’s first track. The unit automatically stops
when all discs have been played back.
TR-1
Note:
In the TR-1 mode, the CD Changer determines
whether it is a CD-single by the total playing
time, not the size of the disc. Therefore, even if
a 12-cm disc is loaded, the unit will recognize it
as a CD-single if it includes 4 tracks or less and
its total playing time is less than 27 minutes, and
play back only the disc’s first track.
16
COMPACT CD CHANGER
DUAL OPTICAL OUTPUT
DISC
DISC
DISC
1
2
3
3
DISC CHANGER
STANDBY/ON
STANDBY
DISC MODE
DISPLAY
DISC
C-707CHX
DISPLAY
Changing the display
Note:
The display changes each time you press the
DISPLAY button during play.
In the following cases, the display will show
“--:--”:
• An attempt to display the remaining time is
made when Track 21 or a later track is
playing.
DISPLAY
• An attempt to display the remaining time for
the playing track or disc is made when Track
21 or a later track is stored in memory.
• An attempt to display the remaining time for
the playing disc is made during Memory play
when the total time of the stored tracks in
memory exceeds “99:59”.
• An attempt to display the remaining time for
the playing track or disc is made when tracks
of other discs are stored in memory.
• An attempt to display the remaining time for
the playing disc is made during Random play.
While the unit is playing or in pause mode:
Elapsed time for the playing track
Remaining time for the playing track
Remaining time for the playing disc
Track number of the playing track
While the unit is stopped:
Total playback time
Total number of tracks
17
Memory play
G.EQUALIZER
POWER
CLOCK
SLEEP
EFFECT
MODE
RC-414S
TUNER
PRESET
FM
AM
INPUT
TAPE
(Supplied with R-805X)
DVD
MD
PAUSE/STEP
REPEAT SCROLL
PLAY MODE CLEAR
REPEAT RANDOM
MEMORY CLEAR
REPEAT PLAY MODE
REC
CD
DISC
CDR
MEMORY
DISC
TONE
CLEAR
REC
2
TIMER
1
4
3
6
MUTING
5
UP/DOWN
ENTER
7
8
9
VOLUME
ACOUSTIC
10/0 PRESENCE
--/---
OFF
1
2
3
You can perform Memory playback, Random playback, and Repeat playback using the remote
controller (RC-414S) that comes with Onkyo R-805X. (You can also control the unit using the system
remote controller that came with the Onkyo Separate Collection series.)
Memory play
You can store your favorite selections from up to 3 discs in the CD Changer’s internal memory. Up to
40 selections can be stored.
• A selection here means to select either a single track or all tracks of a disc.
• The memory contents will not be lost even if you turn off the unit with Memory play stopped.
The following is an example of storing 3 selections in memory:
Selection 1: Track 3 of Disc 1
Selection 2: All tracks of Disc 2
Selection 3: Track 12 of Disc 3
1
Press the MEMORY button when
the CD Changer is stopped.
2
Press the DISC button once or
more to select “DISC 1”.
The MEMORY indicator appears.
You may use the remote controller’s DISC
button .
MEMORY
MEMORY
Remote controller
DISC
DISC
Note:
Pressing the MEMORY button during play
causes the playing track to be stored as “P-1”.
DISC 1
• If you skip this step, the current disc
remains selected.
18
G.EQUALIZER
POWER
CLOCK
SLEEP
EFFECT
MODE
RC-414S
TUNER
PRESET
FM
AM
INPUT
TAPE
(Supplied with R-805X)
DVD
MD
PAUSE/STEP
REPEAT SCROLL
PLAY MODE CLEAR
REPEAT RANDOM
MEMORY CLEAR
REPEAT PLAY MODE
REC
CD
DISC
DISC
CDR
MEMORY
,
TONE
CLEAR
REC
2
TIMER
1
4
3
6
MUTING
3
5
UP/DOWN
ENTER
7
8
9
VOLUME
ACOUSTIC
10/0 PRESENCE
--/---
OFF
1
2
3
3
Press the
or
5
Press the
button on the unit or the
button on the remote
controller repeatedly to select
“AL” on the display. Then, press
the MEMORY button on the
remote controller to store all
tracks of the disc.
or
button once or more to select
Track 3 on the display. Then,
press the MEMORY button on
the remote controller to store
the track.
or
The track in memory are played in the
order you specified.
Remote controller
Remote controller
3
MEMORY
MEMORY
Storing tracks using the remote controller
Simply press the number button “3”. Each time
you press a number button, the corresponding
track number is stored in memory.
6
Press the DISC button once or
more to select “DISC 3”.
You may use the remote controller’s DISC
button.
4
Press the DISC button once or
more to select “DISC 2”.
Remote controller
DISC
DISC
You may use the remote controller’s DISC
button.
Remote controller
DISC
DISC
DISC 3
DISC 2
(Continued to the next page)
19
Memory play (continued)
G.EQUALIZER
POWER
CLOCK
SLEEP
EFFECT
MODE
RC-414S
TUNER
PRESET
FM
AM
INPUT
TAPE
(Supplied with R-805X)
DVD
MD
PAUSE/STEP
REPEAT SCROLL
PLAY MODE CLEAR
REPEAT RANDOM
MEMORY CLEAR
REPEAT PLAY MODE
REC
CD
DISC
CDR
CLEAR
TONE
CLEAR
REC
2
TIMER
1
4
3
6
MUTING
5
Number
buttons
UP/DOWN
ENTER
7
8
9
VOLUME
ACOUSTIC
10/0 PRESENCE
--/---
OFF
1
2
3
7
Press the
or
8
Press the
button.
Remote controller
button once or more to select
Track 12 on the display. Then,
press the MEMORY button on
the remote controller to store
the track.
• The CD changer plays the stored tracks
in the stored order.
• To stop Memory play, press the button.
You may press the number button “12”
on the remote controller to store Track 12.
To return to Normal play:
Remote controller
--/---
•Press the MEMORY button to turn off the
MEMORY indicator. If you press the MEMORY
button during Memory play, you will return to
Normal play from the currently playing track.
•To return to Memory play again, first stop
playback and then press the MEMORY button.
Note that pressing the MEMORY button without
stopping playback erases all tracks in the memory
and stores the playing track as “P-1”.
1
Checking the tracks stored in the memory
While the CD Changer is stopped, press the
2
or
button for at least 1 second.
This displays the disc number, the track number
and the program number of the first track in the
memory. To view the second track, press the
button again for at least 1 second.
Note:
• If the number of selections stored in the
memory reaches 40, “FULL” will appear
on the display. In this case, you cannot
store tracks any more.
Clearing the stored tracks
CLEAR
When Memory play is stopped
(when the MEMORY indicator is lit),
press the CLEAR button.
Pressing this button repeatedly clears the tracks
you stored one by one in the reverse order (from
the last track to the first).
20
Other play modes
G.EQUALIZER
POWER
CLOCK
SLEEP
EFFECT
MODE
RC-414S
TUNER
PRESET
FM
AM
INPUT
TAPE
(Supplied with R-805X)
DVD
MD
COMPACT CD CHANGER
DUAL OPTICAL OUTPUT
PAUSE/STEP
DISC
DISC
DISC
1
2
3
REPEAT SCROLL
PLAY MODE CLEAR
REPEAT RANDOM
MEMORY CLEAR
REPEAT PLAY MODE
REC
CD
RANDOM
REPEAT
3
DISC CHANGER
STANDBY/ON
STANDBY
DISC
CDR
DISC MODE
DISPLAY
DISC
TONE
CLEAR
REC
2
C-707CHX
TIMER
1
4
3
6
MUTING
5
UP/DOWN
ENTER
7
8
9
VOLUME
ACOUSTIC
10/0 PRESENCE
--/---
OFF
1
2
3
Random play
Repeat play
You can play all tracks of the disc(s) in random
order.
You can repeat playing the tracks of the disc(s).
1
Press the RANDOM button.
1
2
Press the REPEAT button.
The RANDOM indicator appears and the
CD Changer starts Random play.
You can enjoy Random play of tracks on
different discs.
The REPEAT indicator appears.
REPEAT
REPEAT
RANDOM
RANDOM
Press the
button.
Remote controller
Notes:
• During Memory play, pressing the
RANDOM button starts Random play of
only the stored tracks.
• During Random play, pressing the
REPEAT button will start another
Random play, with a new track order,
when the current Random play of the
entire disc is completed.
Tracks to be repeated vary depending on
playback mode as shown in the table below.
Play mode Repeated tracks
Normal
Memory
Random
All tracks on disc
Tracks in memory (in stored order)
Repeats Random play of all tracks
on disc
To return to Normal play:
TR-1
First tracks of CD-singles (see page16)
Tracks on selected disc
Press the RANDOM button again.
1 DISC
RANDOM
To return to Normal play:
• Press the REPEAT button again. The REPEAT
indicator disappears.
• To cancel the Random playback, press the
stop button ( ). You can also cancel Random
playback by pressing the Open/Close button
of the corresponding disc tray and open the
tray.
REPEAT
21
Other play modes (continued)
COMPACT CD CHANGER
DUAL OPTICAL OUTPUT
DISC
DISC
DISC
1
2
3
3
DISC CHANGER
STANDBY/ON
STANDBY
DISC MODE
DISPLAY
DISC
C-707CHX
DISC
DISC MODE
Playing the first tracks only
(TR-1 play)
3
Press the DISC MODE button once or
more to display “TR-1” on the display.
DISC MODE
In this mode, you can play the first tracks of
several CD-singles one after another. You can
replace non-playing discs while one disc is
playing. The TR-1 play mode is useful for making
your own MD, CD-R or tape from your favorite
CD-singles.
TR-1
Each time you press the DISC MODE
button, the disc mode changes in the
following sequence:
Normal play
(No indication made)
1
Place discs in all the disc trays.
TR-1
1DISC
DISC 1
Label side up
4
5
Press the DISC button once or
more to select DISC 1.
DISC 2
The CD Changer will immediately start
playing the first track of the first disc.
DISC
DISC 3
Place only one disc on
each tray.
• To do so, first press the DISC 1 button
and load the first CD-single.
• Similarly, load the second and the third
CD-singles using the DISC 2 and DISC 3
buttons.
Press the
button.
The CD changer starts playing the first
track of the first disc.
Remote controller
2
Press the
3) for the disc tray in which you
place the third disc.
button (DISC 1 - DISC
Note:
You can enjoy TR-1 play of four or more discs.
First press the REPEAT button on the remote
controller to display the REPEAT indicator and
start TR-1 play. Then, replace the discs for which
playback has been finished one after another.
22
Handling CDs
Playable discs
Taking the CD out of the disc case
This unit can play back the follwing discs.
1
Hold the disc case in the palm of
one hand and pull the cover
upward with the other hand to
open the disc case.
Disc Contents Disc
Maximum
mark
size
12 cm
8 cm
playback
time
Approx.
74minutes
Approx.
Audio
CDs
Audio
(CD single) 20 minutes
You cannot play back discs other than those listed
above.
Do not use discs that are not audio discs (eg.CD-
ROMs for use with personal computers), as these
could damage the speakers and amplifier.
2
While pushing on the center grip
of the disc case with your finger,
take out the disc by holding its
edges.
Avoid using heart-shaped or octagonal discs.
Playing irregularly shaped discs may damage the
internal mechanism of the unit.
Important notes on handling CDs
Do not use discs on which adhesive from adhesive
tape or a disc label (if it is a rental disc) remains.
Otherwise, you may not be able to eject the discs
or the unit may become inoperative.
• Carefully lift the disc from the disc case,
making sure to only hold the disc by its edges
or the hole in the middle.
• A dry, soft cloth may be used to wipe dust
and fingerprints off the surface of CDs.
• Do not use volatile agents on discs, such as
thinner or benzine. Also, do not use
conventional record cleaner or antistatic agents.
• Do not place a CD in direct sunlight or
locations subject to high humidity or low
temperature.
• Do not store a CD in the CD changer tray for
long periods of time.
23
Troubleshooting
If you have any problems with the unit, please check the troubleshooting table below first.
For any problems not described in the table, please consult your nearest Onkyo authorized service
center.
Symptom
Cause
Remedy
STANDBY button is pressed, • Power cord plug is not properly
• Insert the plug firmly.
but power does not come
on.
connected to AC outlet.
(See pages 11.)
Disc is loaded in the disc
tray, but playback will not
begin.
• Disc is in the disc tray upside
down.
• Load the disc with the label facing
upward.
• Disc is dirty.
• Clean the disc. (See page 23.)
• Moisture has accumulated inside
the CD Changer.
• Remove the disc from the disc tray,
place the CD Changer in a warm
place and leave the power on for
about one hour. (See page 4).
• Disc in the disc tray is loaded off- • Load the disc properly in the disc
center.
tray.
No sound
• Incomplete or incorrect
connections.
• Insert all plugs firmly into jacks.
(See pages 8-9.)
Disc skipping
• Disc is dirty.
• Clean the disc. (See page 23)
• Disc is scratched.
• Replace the disc.
• CD Changer has been bumped.
• Place the CD Changer in a more
stable location.
Search time (when moving
to a specific track) is
extremely long.
• Disc is dirty.
• Clean the disc. (See page 23)
• Disc is scratched.
• Replace the disc.
Track numbers cannot be
stored in memory.
• No disc in the tray.
• Load a disc into the tray.
• A track number not on the disc is • Use only the track numbers on
being input.
the disc. (See pages 18-20.)
Noise during play
• Interference from TV
• Turn off the TV, or move the unit
farther from the TV.
Remote control does not
function.
• Battery level is low.
• Replace the batteries.
• Your position is too far from the
unit’s remote control sensor or
out of the sensor’s detection
angle.
• Remote control is possible within
a distance of approximately 5
meters from the unit’s sensor and
a detection range of 30°.
(See pages 11.)
• An obstacle exists between you
and the unit’s remote control
sensor.
• Operate from a different position
or remove the obstacle.
The unit does not operate.
• A failure occurred in the unit's
microprocessor.
• Remove the power plug, wait for
approx. 5 seconds, and then re-
insert the power plug.
24
Specifications
Signal readout system
Wow and Flutter
Below threshold of measurability
Optical non-contact
D/A converter
Output level
2 volts r.m.s.
1 bit D/A converter
Frequency response
Power supply rating
5 Hz – 20 kHz
AC 120V, 60 Hz
Total harmonic distortion
Power consumption
0.005% (at 1 kHz)
14 watts
Channel separation
Dimensions (W x H x D)
205 × 91 × 334 mm
85 dB(at 1 kHz)
8-1/16" × 3-9/16" × 13-3/16"
Dynamic range
96 dB
Weight
3.0 kg, 6.6 lbs.
Signal to noise ratio
90 dB
Specifications and external appearance are
subject to change without notice because of
product improvements.
25
Index to parts and controls
For operational instructions, refer to the page indicated in parentheses.
Front panel
STANDBY/ON button [11, 12]
Disc tray [12]
Open/Close button (
[12, 14, 22]
)
COMPACT DISC CHANGER
DUAL OPTICAL OUTPUT
DISC 1
DISC 2
3 DISC CHANGER
DISC 3
Stop button (
[13]
Play/Pause button
)
STANDBY/ON
STANDBY
DISC MODE
DISPLAY
DISC
(
)
[13, 20, 22]
DISC button [13, 18, 19]
STANDBY
indicator
[11, 12]
Track UP and DOWN buttons
DISPLAY
button [17]
(
)
,
[14, 19, 20]
DISC MODE
button [16, 22]
Display
Elapsed/Remaining
time indicator
Pause
indicator
Memory
indicator
Disc mode indicator
-
1
MEMORY
1 DISC
TR
SINGLE ELAPSED
TOTAL REMAIN
REPEAT
DISC 1
DISC 2
DISC 3
1
6
2
7
3
8
4
9
5
10
11 12 13 14 15
15
RANDOM
Disc
RANDOM
Music calendar
Multi-purpose display
Over indicator
indicators indicator
(Appears when the disc
contains more than
15 tracks.)
REPEAT indicator
26
Remote controller
Remote controller included with the R-805X (RC-414S).
To operate the included remote controller, make the appropriate connection to the
connection.
remote
You can also control the unit using the system remote controller that came with the Onkyo Separate
Collection series.
RC-414S (supplied with R-805X)
G.EQUALIZER
POWER
CLOCK
SLEEP
EFFECT
MODE
TUNER
PRESET
FM
AM
INPUT
TAPE
DVD
MD
PAUSE/STEP
REPEAT SCROLL
PLAY MODE CLEAR
REPEAT RANDOM
MEMORY CLEAR
REPEAT PLAY MODE
REC
CD
CD operation buttons
REPEAT : Repeat mode button
RANDOM : Random play button
: Stop button
: Pause button
: Play button
MEMORY : Memory button
CLEAR : Clear button
DISC : Disc button
DISC
CDR
TONE
CLEAR
REC
2
TIMER
1
4
3
6
MUTING
Number buttons
[14, 19, 20]
5
Used to select tracks
when the R-805X
amplifier’s input
selector is in ”CD”
position.
UP/DOWN
ENTER
7
8
9
VOLUME
ACOUSTIC
: Track down button
: Track up button
--/---
10/0 PRESENCE
OFF
1
2
3
REMOTE CONTROLLER RC-414S by
27
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8111 Fax: 072-833-5222
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
ONKYO EUROPE ELECTRONICS GmbH
Industriestrasse 20, 82110 Germering, GERMANY
ONKYO CHINA LIMITED
Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,
N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039
HOMEPAGE
Printed in Japan
E
SN 29342876A
I0104-2
|