Seagate Computer Drive STBM2000100 User Guide

Seagate Business Storage 1-Bay,  
2-Bay, and 4-Bay NAS User Guide  
 
Contents  
Seagate Business Storage NAS User Guide  
3
 
I can’t store any more files on a shared folder because its volume is full. .  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Seagate Business Storage NAS User Guide  
4
 
Preface  
About This Guide  
1. Preface  
About This Guide  
This User Guide is for users only. Your administrator should have already set up your  
Seagate NAS, created a user account for you, and provided you with information to help you  
quickly get started using the Seagate NAS on your network to back up your computer files  
and access and share information.  
Computer Requirements  
Any computer that will access your Seagate NAS must meet these requirements:  
Software  
A Microsoft Windows® or Apple Macintosh® computer running one of these operating  
systems:  
Windows XP, Windows Vista®, Windows 7 or Windows 8, and with the latest Service  
Pack installed  
Mac OS X 10.4.11 or later  
Supported Web Browsers  
Microsoft Internet Explorer 8 or newer  
Apple Safari 3, 4 or newer (Windows or Mac)  
Mozilla Firefox 3 or newer (Windows or Mac)  
Hardware Requirements  
Local area network (LAN) or wireless LAN (WLAN)  
Network switch or router, with at least one available 10/100/1000 Ethernet port  
Internet connection (for remote access to NAS and software and firmware updates)  
Ethernet port on your PC  
Seagate Business Storage NAS User Guide  
5
 
             
Preface  
Finding More Information  
Finding More Information  
Contact your administrator to obtain more information about your Seagate NAS. Additionally,  
review these documents to help you back up your data and access your data remotely:  
Seagate NAS Backup User Guide  
Seagate Global Access User Guide  
For more information, please refer to the Seagate Web site at www.seagate.com/support.  
Seagate Business Storage NAS User Guide  
6
 
 
All About the Seagate Business Storage NAS  
Introduction  
2. All About the Seagate Business  
Storage NAS  
Introduction  
This chapter introduces your Seagate Business Storage NAS and describes what you might  
want to use your Seagate NAS for.  
About the Seagate Business Storage NAS  
The Seagate Business Storage NAS is a file server, a device that is used for storing and  
sharing all types of computer files on a local network. The Seagate NAS can contain from one  
to four Serial ATA (SATA) disk drives and has built-in data protection to help keep your data  
safe from disk drive failures and other catastrophes.  
The Seagate NAS comes with software to help you back up, store, protect, and share your  
files.  
The Seagate NAS is typically used by small business owners and people with home offices  
who want to store and protect the computer files that are important to them—client files,  
business records, financial information, and so on—and make them available to other people  
on their local network or over the Internet.  
If you’ll be accessing the Seagate NAS directly (inserting USM drives or attaching USB  
device storage for backups), review the Quick Start Guide included with the product to  
understand the hardware components of your NAS. Additionally, you can download the Quick  
Start Guide for your Seagate NAS at www.seagate.com/support.  
What You Can Do With the Seagate NAS  
In general, you can use your Seagate NAS to:  
Create a central storage place for the files you want to share with other people on your  
local network or over the Internet.  
Create and maintain automatic backup copies of all your files—even your operating  
systems.  
Seagate Business Storage NAS User Guide  
7
 
       
All About the Seagate Business Storage NAS  
How to Get Started  
Share your files—contracts, business presentations, progress reports, and so on—with  
other people on your local network or with business clients over the Internet.  
Recover quickly from a computer disaster, such as the unintentional deletion of important  
files, the failure of a disk drive, the loss or theft of your computer.  
Access your Seagate NAS over the Internet from anywhere in the world to download files  
that you need where you are, or upload files that you want to secure or share while you’re  
out of the office.  
Share a USB printer with other people on your local network.  
Store and share your photos, videos, and music for everyone on your local network to  
enjoy.  
Note: Your Seagate NAS administrator must set up your Seagate NAS as a media server in  
order for you to store and share your media.  
About Seagate NAS Users  
As a Seagate NAS user, your tasks generally include:  
Changing your login password  
Saving and sharing files on the Seagate NAS  
Backing up files to the Seagate NAS  
Accessing the Seagate NAS over the Web or from a mobile device, using Seagate Global  
Access  
Downloading large Web files directly to the Seagate NAS  
Accessing music, video, and photos (if the Seagate NAS is set up as a media server)  
Sharing a USB printer that’s connected to the Seagate NAS (if any)  
How to Get Started  
This section describes the getting-started tasks for Seagate NAS users.  
1. Ensure that you have these items from the Seagate NAS administrator:  
The Seagate NAS Discovery software  
The Seagate NAS Backup software  
Your Seagate NAS log in name and password  
The names of the shared folder(s) that you can access  
A description of any access limitations you have (for instance, read-only access to a  
particular folder share)  
Seagate Business Storage NAS User Guide  
8
 
   
All About the Seagate Business Storage NAS  
How to Get Started  
2. Install the Seagate NAS software (see page 11).  
Note: You don’t need to install the Seagate NAS Backup software if you are already using other  
software for regular file backups.  
3. Connect to the server and the shared folders you have access to using Seagate NAS  
4. Share your files by saving them to shared folders that can be accessed by other people  
on your local network or over the Web.  
5. (Optional) Create a full backup of your important files, or set up recurring backups, using  
6. (Optional) If a USB printer has been connected to the Seagate NAS, add it to your list of  
available printers, following your operating system’s instructions.  
Seagate Business Storage NAS User Guide  
9
 
All About the Seagate Business Storage NAS  
How to Get Started  
Seagate Business Storage NAS User Guide  
10  
 
Getting Started with Your Seagate Business Storage NAS  
Getting Started as a Seagate NAS User  
3. Getting Started with Your Seagate  
Business Storage NAS  
Getting Started as a Seagate NAS User  
Follow the steps in this section to get started with your Seagate NAS.  
1. Ensure that you have received these items from the Seagate NAS administrator:  
The Seagate NAS Discovery software  
Your Seagate NAS log in name and password  
The Seagate NAS Backup software (optional)  
The names of the shared folders that you can access  
A description of any access limitations you have (for instance, read-only access to a  
particular share)  
2. Install the Seagate NAS software.  
Install both the Discovery and Backup software, unless you are already using another backup  
software program or have a Mac and are using the Time Machine for backup.  
3. Connect to the Seagate NAS and the shared folders you have access to using Discovery.  
(Windows) Double-click the Discovery icon on your desktop.  
(Mac) Double-click the Discovery icon in your Applications folder.  
When Discovery opens, it automatically searches for all Seagate NAS devices on your  
network and displays them in a list.  
4. Select your new Seagate NAS.  
A list of shared folders on the server appears.  
5. Scroll through the list of shared folders and then do one or more of the following:  
To view shared folders, select the shared folder and then click View Share Details.  
To map a shared folder, select the share you want, then select a computer drive, and then  
click Map Drive.  
If you have access to more than one shared folder, continue to find and map additional  
shared folders as needed.  
Seagate Business Storage NAS User Guide  
11  
 
       
Getting Started with Your Seagate Business Storage NAS  
Getting Started as a Seagate NAS User  
Note: You can mount/map as many public and private shared folders as you need to. However,  
to mount/map more than one private share, each private share must have the same log on  
credentials.  
6. Save your files to shared folders that can be accessed by other people on your local network  
or over the Web.  
Optional Steps  
(Optional) Create a full backup of your important files, or set up recurring backups, using  
the Backup software (see page 17).  
(Optional) If a USB printer has been connected to the Seagate NAS, add it to your list of  
available printers, following your computer’s operating system instructions.  
(Optional) If your Seagate NAS administrator has enabled the Media Service on the  
server and you have access to the share where the music files are stored, install iTunes  
or DLNA-compliant software such as VLC Media Player on your computer and begin  
streaming music, following the instructions provided with the software.  
(Optional) If your Seagate NAS administrator has enabled Global Access on the Seagate  
NAS, sign up for a free Global Access account so you can access your files over the  
(Optional) If your Seagate NAS administrator has enabled the Wiki server on the Seagate  
NAS, you can open a Wiki page and share information with other users. See “Accessing  
Creating a Seagate Global Access Account  
Seagate Global Access is a service that you can use to view, download, share, and work with  
the files stored on your Seagate NAS from anywhere in the world, share files stored on a  
private shared folder, or share your files with anyone outside of your network.  
Note: Check to see if your administrator has already set up your Global Access account before you  
begin.  
To create a new Seagate Global Access account  
Log into your the NAS Manager application with your username and password. Go to  
Sharing > Global Access.  
Click the Enable checkbox. Supply the following information:  
User: Select your username from the drop-down list.  
Email: Enter your email address. You will receive a notification via email to help you  
complete the setup of your Seagate Global Access account.  
Seagate Business Storage NAS User Guide  
12  
 
     
Getting Started with Your Seagate Business Storage NAS  
Getting Started as a Seagate NAS User  
Password: Enter a password. This is the password you will use to access Seagate Global  
Access remotely.  
Click Submit to create the account.  
To register an existing TappIn account with Seagate Global Access  
The following steps assume you have a TappIn account and want to use it to access  
information on your Seagate NAS.  
Log into the NAS Manager application with your username and password. Go to Sharing >  
Global Access.  
Click the Enable checkbox. Supply the following information:  
User: Select your username from the drop-down list.  
Email: Enter the email address used to create the TappIn account. You will receive a  
notification via email to help you complete the registration of your Seagate Global Access  
account.  
Password: Enter a password. This is the password you used to set up the TappIn  
account.  
Click Submit to create the account.  
Note: When you click Submit, you are associating your username on the Seagate NAS with an  
existing TappIn account to obtain access to Seagate Global Access.  
Review the Seagate Global Access User Guide for more information. After you’ve enabled  
your user account for Seagate Global Access, you can also download an app to your mobile  
device to access content on your Seagate NAS. Currently, Seagate Global Access supports  
Apple® and Android® mobile devices. To download Quick Start Guides and User Guides for  
these mobile devices, go to http://www.seagate.com/software/globalaccess/.  
Seagate Business Storage NAS User Guide  
13  
 
Getting Started with Your Seagate Business Storage NAS  
Getting Started as a Seagate NAS User  
Seagate Business Storage NAS User Guide  
14  
 
Using Your Seagate Business Storage NAS  
Introduction  
4. Using Your Seagate Business  
Storage NAS  
Introduction  
This chapter provides tips and information that will help Seagate Business Storage NAS  
users get the most out of the device.  
You can:  
Store your files on the Seagate NAS and share them with others.  
Back up your files, applications, and even operating systems using Seagate NAS  
Backup.  
Access your Seagate NAS files over the web using Seagate Global Access (if enabled).  
Download large web files directly to the Seagate NAS using the Seagate NAS  
Downloader Manager.  
Retrieve accidentally deleted files from the Seagate NAS Manager Recycle Bin (if  
enabled).  
Understanding Your Seagate NAS User Account  
This section describes the features and possible limitations of your Seagate NAS user  
account.  
Access Limitations  
Shared folders on the Seagate NAS can be either public (open to everyone, with some  
restrictions) or private (restricted to selected user accounts).  
See your Seagate NAS administrator to find out what your access limitations are.  
Seagate Business Storage NAS User Guide  
15  
 
       
Using Your Seagate Business Storage NAS  
Understanding Your Seagate NAS User Account  
Private Shared Folders  
Private shared folders are password protected and restricted to use by individuals designated  
by your Seagate NAS administrator.  
Once the Seagate NAS administrator creates a user account, you can limit access to a  
private shared folder by:  
Limiting access to this share to specified Seagate NAS users only.  
Limiting some Seagate NAS users to read-only access. Read-only access means that  
you can view files on the share, but can’t edit those files or upload your own files to the  
share.  
You have full access to your private shared folder, which allows you to save and back up your  
files to the shared folder, edit files on the shared folder, and download any files from the  
shared folder to your computer or to a USB/USM drive connected to the Seagate NAS.  
Note: To mount/map more than one private shared at a time, each private share must have the same  
log on credentials.  
You can grant other people access to some or all of the files on your private shared folder  
locally, or remotely, by using Seagate Global Access. See page 12 for more information and  
for instructions on setting up a Seagate Global Access account. Refer to the Seagate Global  
Access User Guide for help granting other people access to your private share.  
Public Shared Folders  
Public shared folders are not restricted, and you can mount/map as many public shared  
folders as you need to.  
Storage Space Limitations  
Your Seagate NAS administrator can limit the amount of storage space you’re allowed to use  
on a specific shared folder.  
You may have space limitations on one shared folder but not on another; you may have more  
space to use on one shared folder and less on another. Or, you may have no space  
limitations at all—except for the maximum storage space on the Seagate NAS itself.  
See your Seagate NAS administrator to find out if you have any storage space limitations,  
and what those limitations are.  
If you fill your allocated storage space, either remove older or unneeded files to make more  
room, or see your Seagate NAS administrator to have more storage space assigned to you.  
Automatic Sorting for Media Files  
Shared folders on your Seagate NAS may be set to automatically sort media files to a  
specific location on your computer, based on the type of files. For instance, when you  
download music files, they would automatically be placed in a folder called Our Music.  
Seagate Business Storage NAS User Guide  
16  
 
   
Using Your Seagate Business Storage NAS  
Accessing Shared Folders and Files on the Seagate NAS  
See your Seagate NAS administrator to find out if the shared folders that you can access  
have automatic download sorting enabled.  
Grace Time Limits for Quotas  
If there is a storage quota for your account, your Seagate NAS administrator can set a grace  
time limit, which allows a quota to exceed its storage limitations for a period of time. Once the  
grace date is reached, no additional files can be added until space is made available.  
See your Seagate NAS administrator to find out if your user account has any grace time limits  
for stored files.  
Accessing Shared Folders and Files on the Seagate  
NAS  
After you have connected to the Seagate NAS, and mounted/mapped the shared folders you  
can access, you can immediately begin saving files to the Seagate NAS.  
Note: You can mount/map as many public and private shared folders as you need to. However, to  
mount/map more than one private share, each private share must have the same log on  
credentials.  
You can access the shared folders on your Seagate NAS:  
Locally, the way you would access any network drive on your computer (for instance,  
using Windows Explorer). See page 11 for help mounting/mapping shared folders to your  
computer.  
Remotely, over the Web, using Seagate Global Access (if your Seagate NAS  
administrator has enabled Global Access on the Seagate NAS). For more information  
about Global Access, see page 12.  
Once you have successfully accessed a shared folder, you can view and download files from  
the shared folder, and upload and back up files to that shared folder, if you have permission  
See your Seagate NAS administrator for help getting access to the shared folders you need  
and understanding your viewing, downloading, and uploading permissions.  
Backing Up Your Files  
To protect your important files from loss, corruption, or accidental deletion, you should  
complete and maintain regular file backups using Seagate NAS Backup.  
You can also back up files by downloading them from your Seagate NAS to an external USB/  
USM drive, or uploading them from a USB/USM drive to the Seagate NAS.  
Seagate Business Storage NAS User Guide  
17  
 
       
Using Your Seagate Business Storage NAS  
Accessing Files on Your Seagate NAS Over the Web  
Backing Up Files with Seagate NAS Backup  
Seagate NAS Backup is a full backup software application with a wide range of features that  
let you customize a backup system to suit your needs.  
®
Note: Seagate Backup software supports personal computers running Windows operating systems  
only.  
You can use Seagate NAS Backup to start a backup whenever you want. You can also use  
Seagate NAS Backup to set up recurring backups that can take place at convenient times (for  
instance, overnight or on the weekends, when you aren’t using your computer).  
You can use Seagate NAS Backup to protect all the files, applications, and even the  
operating system on your computer.  
If you haven’t already installed Seagate NAS Backup, see page 11 for instructions.  
For more information, refer to the Seagate NAS Backup User Guide.  
Using the Time Machine to Protect Files  
If you are a Mac user, verify that your Seagate NAS administrator has enabled the Seagate  
NAS as a Time Machine® target:  
While logged into your Mac, open Time Machine preferences.  
Click Select Disk...  
Select .TMBACKUP  
Enter your Seagate NAS user name and password.  
Backup will start automatically.  
Accessing Files on Your Seagate NAS Over the Web  
If your Seagate NAS administrator has enabled Global Access on the Seagate NAS, sign up  
for a free Global Access account so you can access files on your Seagate NAS over the  
Web.  
Seagate Global Access is a service that you can use to view, download, and work with the  
files stored on your Seagate NAS from anywhere in the world, share files stored on a private  
share, or share your files with anyone outside of your network.  
With Global Access, you can:  
Download important business files or presentations from a client’s office anywhere in the  
world.  
Share files with clients without requiring them to use an FTP application.  
Seagate Business Storage NAS User Guide  
18  
 
     
Using Your Seagate Business Storage NAS  
Downloading Large Web Files to Your Seagate NAS  
Upload important files from your laptop so that you know they’re safe while you continue  
to travel.  
Grant other people access to files on your private share.  
To access your Seagate NAS over the Web:  
Ensure that Global Access is enabled on the Seagate NAS. See your Seagate NAS  
administrator to find out more.  
Create a Global Access account. Anyone who wants to access the Seagate NAS over the  
Web must have their own Global Access account. (Accounts are free.)  
See page 12 for instructions on setting up a Global Access account. Refer to the Seagate  
Global Access User Guide for help granting other people access to your private shared  
folder(s).  
Downloading Large Web Files to Your Seagate NAS  
Seagate NAS Manager includes a special tool for downloading large files directly to the  
Seagate NAS from FTP and other sites on the Web. This tool is called the Downloader  
Manager, and it allows your Seagate NAS administrator to manage when large Web  
downloads take place so that the Seagate NAS isn’t overwhelmed.  
Downloader jobs may not begin immediately. Web downloads take place automatically in the  
order in which they appear in the Downloader Manager queue (which can be adjusted by  
your Seagate NAS administrator), so if your job isn’t first in line, it won’t start right away.  
Additionally, your Seagate NAS administrator can also impose limits on when Web download  
jobs can take place and how many can take place simultaneously (never more than three).  
Seagate NAS administrators can limit Web downloads to evenings, weekends, or other quiet  
times in the week.  
See your Seagate NAS administrator to find out when you can download Web files using the  
Downloader Manager, or to have your existing download job moved up in the Downloader  
queue.  
Retrieving Deleted Files from the Recycle Bin  
Shared folders on your Seagate NAS may be protected by the NAS Manager Recycle Bin.  
When the Recycle Bin is enabled on a shared folder, NAS Manager saves files deleted from  
the shared folder so that they may be retrieved if you need them back.  
If you accidentally delete a file, open NAS Manager (see page 11) and go to Storage >  
Recycle Bin Manager. For instructions for retrieving deleted files, refer to the NAS Manager  
online Help.  
Seagate Business Storage NAS User Guide  
19  
 
   
Using Your Seagate Business Storage NAS  
Accessing the Wiki Server on the Seagate NAS  
Accessing the Wiki Server on the Seagate NAS  
The Seagate NAS administrator may enable the Wiki server on the NAS. The Wiki server is a  
local web site on the Seagate NAS that can be used for information sharing and  
collaboration. When the Wiki server is enabled, all Seagate NAS users have access to this  
site.  
To access the Wiki server, open NAS Manager (see page 11), and go to Sharing >Wiki  
Server. Click the Go to Wiki Server button to open the Wiki server in a new browser window.  
For information about using the Wiki server, click wiki on the left side of the page, then click  
dokuwiki.  
Seagate Business Storage NAS User Guide  
20  
 
   
Solving Problems  
General Troubleshooting Tips  
5. Solving Problems  
This chapter provides solutions to the most common problems you may encounter while  
using your Seagate Business Storage NAS:  
General Troubleshooting Tips  
If you have problems setting up or using your Seagate NAS, follow these suggestions:  
Ensure that your network is functioning properly.  
Ensure that the Seagate NAS is properly connected to a power source and turned on.  
Ensure that your computer meets the Seagate NAS system requirements. See  
Ensure that your computer is running a supported Web browser. See “Computer  
Requirements” on page 5 for a list of supported browsers.  
Ensure that you are logging in with the correct user name and password. (Remember that  
passwords are case-sensitive.)  
Common Problems and Solutions  
This section provides solutions to common problems that may occur in NAS Manager.  
I can’t connect to the Seagate NAS over the local network.  
Check that the Seagate NAS is powered on and connected to the network.  
Try connecting to the Seagate NAS from a different computer.  
I can’t connect to the Seagate NAS over the Web.  
Check that the Seagate NAS administrator has enabled Global Access.  
I can’t open NAS Manager.  
Check that the Seagate NAS is powered on and connected to the network. Run Seagate  
NAS Discovery and try to reconnect with the Seagate NAS, then launch the NAS Manager.  
I can’t log in to NAS Manager.  
Ensure that you are using a valid user name and password. Remember that user names and  
passwords are case-sensitive.  
Seagate Business Storage NAS User Guide  
21  
 
             
Solving Problems  
Common Problems and Solutions  
I can’t access a shared folder.  
Ensure that you have access to that shared folder.  
Ensure that you are using a valid username and password. Remember that usernames  
and passwords are case-sensitive.  
The volume that contains the shared folder may be degraded because of a disk drive  
error or failure. Check the status of the disk drives on the Seagate NAS; see the Seagate  
Business Storage NAS Administrator Guide for more information.  
I can’t access a file on a shared folder.  
Ensure that you are allowed access to that file.  
The volume that contains the share may be degraded because of a disk drive error or failure.  
Check the status of the disk drives on the Seagate NAS; see the Seagate NAS Administrator  
Guide for more information.  
I can’t store any more files on a shared folder because its volume is  
full.  
If you are a user, see your Seagate NAS administrator.  
If you are an administrator, consider removing some of the files currently stored on the  
Seagate NAS.  
I can’t get streaming music from the Seagate NAS.  
Ensure that you have iTunes or installed on your computer, or are using a DLNA-compliant  
device or software. Ensure that you are using a computer that’s connected to the local  
network. Ensure that you have access to the share where music files are stored, and that the  
administrator has enabled the Media Service for the Seagate NAS.  
A volume is in degraded mode.  
A disk drive may have failed. For further assistance, contact your Seagate NAS administrator.  
Seagate Business Storage NAS User Guide  
22  
 
         
Glossary  
6. Glossary  
access level  
Also known as permission level, the amount of access any person has to the Seagate NAS.  
Seagate NAS Manager has two permission levels: administrator and user.  
administrator  
A Seagate NAS administrator is responsible for the Seagate NAS and all its settings. An  
administrator can set up or delete user accounts, group accounts, and shared folders; assign  
or remove access permissions; modify any setting on the server; and create other  
administrators. See also user.  
archive backup  
CIFS  
Common Internet File System. A file system that lets people with different computers running  
Windows operating systems share files without having to install special software.  
domain  
A group of computers administered as a single unit from a central location.  
event  
A problem or change in setting on the Seagate NAS. A change in the server’s name or the  
failure of a disk drive are both server events.  
external USB hard drive  
firmware  
Software that’s built into hardware.  
format  
To format a disk drive is to prepare it for reading and writing data. Formatting erases  
background information from a disk drive, tests it, and prepares it for use. Formatting may  
destroy existing files on a disk drive. You must format a disk drive before you can use it.  
FTP  
File Transfer Protocol. A format for exchanging files over the Internet. FTP is commonly used  
to upload files to or download files from a server over the Internet.  
Seagate Business Storage NAS User Guide  
23  
 
 
Glossary  
group account  
In Seagate NAS Manager, a collection of user accounts grouped together to make it faster  
and easier to manage access to shared folders. All users in a group have the same level of  
access to any particular share. See also user account.  
hot-swap  
To remove and replace a disk drive without first powering off the server.  
HTTP (Hypertext Transfer Protocol)  
Rules for exchanging the most common form of documents (hypertext documents) over the  
Internet.  
HTTPS (Hypertext Transfer Protocol over Secure Socket Layer)  
Rules for exchanging HTTP documents over encrypted connections.  
JBOD  
Just a Bunch of Drives. See span.  
IP address  
The identifier of a computer, server, or other device on a TCP/IP network. IP addresses are a  
sequence of four numbers separated by periods. (For example, 123.456.78.1.) Every device  
on your local network has a unique IP address.  
link aggregation  
A method of increasing the speed of a device’s network connection by using more than one  
Ethernet port simultaneously to connect to the network.  
If you connect both of your Seagate NAS LAN ports to your network router or switch and set  
Aggregation in Seagate NAS Manager, both connections work simultaneously and in parallel  
to move data more quickly—similar to filling a bucket using two hoses instead of one.  
local access  
Access to the server from a computer on your local network. Or, manual access to the server,  
which involves physical contact with the server or its cables. See also remote access.  
mirror  
A level of RAID protection also known as RAID 1. A mirror is built from two disk drives, where  
one disk drive is a mirror of the other (the same data is stored on each disk drive). Compared  
to independent disk drives, a mirrored volume provides faster performance, but has only 50%  
of the capacity.  
NFS  
Network File System. An application that lets all users on a network share files that are stored  
on different types of computers.  
Seagate Business Storage NAS User Guide  
24  
 
   
Glossary  
NTP (Network Time Protocol) server  
Synchronizes the date and time of computers and servers on a network, based on  
Coordinated Universal Time (UTC).  
parity  
Data created in volumes with RAID 5 protection that’s used to reconstruct files if one of the  
disk drives in the server fails. See also RAID 5.  
private share  
A folder that is accessible only to users with permission granted by the share’s owner.  
RAID  
Redundant Array of Independent Disks. A technology that combines disk drives together for  
improved performance and fault tolerance (the ability to withstand the failure of a disk drive).  
RAID 0  
RAID 1  
RAID 10  
A level of RAID protection. A volume with RAID 10 is built from two or more equal-sized  
RAID 1 volumes. Data in a volume with RAID 10 is both striped and mirrored. Mirroring  
provides data protection, and striping improves performance. See also mirror, and stripe.  
RAID 5  
A level of RAID protection. A volume with RAID 5 is built from a minimum of three disk drives,  
and uses data striping and parity data to provide redundancy. (Parity is extra information  
that’s used to re-create data if a disk drive fails. In volumes with RAID 5, parity data is striped  
evenly across the disk drives with the stored data.) Parity data provides data protection, and  
striping improves performance. See also stripe.  
remote access  
Access to the server from a computer that is not on your local network. For instance,  
accessing the server from a client’s computer, over the Internet, is remote access.  
Remote access can also refer to shutting down or resetting the server using Seagate NAS  
Manager instead of physically pressing the Power button. See also local access.  
RSA key  
An encryption decoder that’s part of SSL, a type of encryption used to protect data being sent  
over a network or the Internet. “RSA” stands for Rivest, Shamir, and Adelman, who invented  
the technology.  
Seagate Business Storage NAS User Guide  
25  
 
       
Glossary  
Seagate Global Access  
A service that you can use to view, download, share, and work with the files stored on your  
Seagate NAS server from anywhere in the world. You can also use Global Access to upload  
files to your Seagate NAS server.  
server  
A computer or device on a network that manages resources. The Seagate NAS server is a  
file server, a storage appliance that’s dedicated to storing files; it can also be used as a print  
server, a device that manages one or more printers.  
shared folder  
A shared folder on your Seagate NAS server that stores and protects backup files, as well as  
other files that can be accessed by other people.  
SMART  
Self-Monitoring Analysis and Reporting Technology. Technology built into disk drives that let  
them automatically monitor their own health and report on possible problems. Not all disk  
drives have SMART support.  
span  
A group of disk drives collected in a server, not protected by RAID. Also known as JBOD. See  
spin down  
Referring to disk drives, a term that means to stop spinning.  
SSL certificate  
Secure Socket Layer certificate, part of the SSL encryption method. SSL (also known as  
Transport Layer Security) is a type of encryption used to protect data being sent over a  
network or the Internet. SSL uses a system of keys, like secret passwords, to send and  
receive files securely.  
stripe  
Also known as RAID 0. A volume with striping includes two or more disk drives where data is  
distributed evenly (striped) across the disk drives in equal-sized sections. A striped volume  
does not maintain redundant data, and so offers no data protection.  
However, compared to an equal-sized group of independent disks, a striped volume provides  
faster performance.  
UPS  
Uninterruptible Power Supply. A power supply that has a battery in it that maintains power to  
a computer or server in the event of a power failure. A UPS is intended to provide enough  
Seagate Business Storage NAS User Guide  
26  
 
   
Glossary  
power for you to save whatever files you’re working on and properly power off the computer  
or server; it’s not meant to keep any system running for the duration of a power failure.  
USB  
Universal Serial Bus. The interface between your computer and the USB devices you plug  
into it. Your computer communicates with USB devices through the USB interface.  
USB drive  
A portable disk drive that connects to a computer with a USB cable, instead of being installed  
inside the computer itself. Also known as a thumb drive, jump drive, flash drive, or external  
USB hard drive.  
user  
In Seagate NAS Manager, a person who can save, back up, and share files using the  
Seagate NAS server, but who can’t modify user account, group account, share, or server  
settings.  
user account  
An account, with a user name and password, that a person uses to access the Seagate NAS  
server. User accounts have access level permissions associated with them.  
volume  
Data storage space that can be made up of one or more disk drives, or of only part of a single  
disk drive.  
Web access protocol  
The rules for sending information over the Internet. Your Seagate NAS server has two Web  
access protocol choices, HTTP and HTTPS.  
workgroup  
A collection of computers on a network that share resources.  
Seagate Business Storage NAS User Guide  
27  
 
     

RCA CRT Television F19426 User Guide
Robic Fan SC 505 User Guide
RTS Network Card ADAM User Guide
Samsung Camcorder VP X300 User Guide
Samsung DVD Player DVDC500XAA User Guide
Samsung Microwave Oven M1713NCE User Guide
Sanyo Air Conditioner 18XLS52 User Guide
Sanyo Oven SK 7S User Guide
SATO Printer MB400i User Guide
Sears Garage Door Opener 13953859 User Guide